Understanding Wave Graphs: 4t & 30° Phase Angle

  • Thread starter Thread starter Maxwell
  • Start date Start date
  • Tags Tags
    Means
Maxwell
Messages
511
Reaction score
0
Lately, I have been trying to get a deeper understanding of a few concepts, and I was trying to analylize a wave I found in my textbook:

I know the sinusoidal equation is:

Vs = Vm*sin({\omega}t + {\phi})

The equation for the given wave is:

Vs = Vm*sin(4t + 30^o)

My question is how does the 4t change this graph? Also, What does the phase angle change*?

If the equation was just Vs = Vm*sin(4t), how would the graph change?

Thank you!

PS - Please excuse the terrible mspaint graph!
 

Attachments

  • wave.JPG
    wave.JPG
    9.3 KB · Views: 468
Engineering news on Phys.org
Well, I may be very wrong, but the angle is the phase angle of the sinusoid. This comes into play when dealing with power factors. ie, phase matching.
hope this sheds some light...


(take everything with a grain of salt, it tastes better that way)
 
Maxwell said:
Lately, I have been trying to get a deeper understanding of a few concepts, and I was trying to analylize a wave I found in my textbook:

I know the sinusoidal equation is:

Vs = Vm*sin({\omega}t + {\phi})

The equation for the given wave is:

Vs = Vm*sin(4t + 30^o)

My question is how does the 4t change this graph? Also, What does the phase angle change*?

If the equation was just Vs = Vm*sin(4t), how would the graph change?

Thank you!

PS - Please excuse the terrible mspaint graph!
you need to understand the relationship between radians and degrees..
{\omega}=2{\pi}/t radians /sec
and how to convert between the two.. and where each one is on the graph ..
 
Maxwell said:
My question is how does the 4t change this graph? Also, What does the phase angle change?
If the equation was just Vs = Vm*sin(4t), how would the graph change?
Actually the graph you attached explains it all.
Phase is basically offset of the regular sin(x) or cos(x), i.e. shift along the horizontal axis. While angular velocity/frquency (w = 4t) is the frequency of the signal, i.e. if it were just t, the sinusoidal graph would have just one wave-length through the period of 2pi, for 4t crudely speaking, you have 4 wave-lengths crammed into segment of 2pi.
So, I would read-up on basic relationship of frequency/period and how f(x) behaves: f(cx), f(x + c) and so on, it's explained in Calculus I.
 
It maybe worth looking into this deeper to show how different variables act on the wave.

Take the formula Vs = A*sin({\omega}t + {\phi})+C

The A is the amplitude and represents the different between the upper and lower peaks.

The \omega is the angular velocity: \omega = 2{\pi}f = 2{\pi}/T

The \phi is the phase angle, i.e. the horizontal offset graphically speaking.

The C is the vertical offset from the x-axis, usually defined as the DC element of the waveform (in electronics).
 

Similar threads

  • · Replies 12 ·
Replies
12
Views
2K
  • · Replies 3 ·
Replies
3
Views
2K
  • · Replies 9 ·
Replies
9
Views
2K
Replies
3
Views
2K
  • · Replies 2 ·
Replies
2
Views
1K
  • · Replies 7 ·
Replies
7
Views
4K
  • · Replies 5 ·
Replies
5
Views
2K
  • · Replies 1 ·
Replies
1
Views
3K
  • · Replies 2 ·
Replies
2
Views
2K
Replies
1
Views
2K