Automotive What is the optimal pump capacity for a 3-liter diesel engine?

atulmalode
Messages
9
Reaction score
0
criteria to find oil pump capacity for engine , do anyone knows for diesel engine 3lits.
 
Engineering news on Phys.org
Big enough to ensure adequate lubrication, cooling and cleaning of bearings, reciprocating masses and valve gear at the required range of engine speeds and loads, under all foreseeable operating conditions.
 

Thread 'Bubble formation in 4 mm gap vessel'

How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Find 3D Printer & Software Resources for Prototype Creation'

I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...
View full post »

Similar threads

External Gear Pump: Capacity & Pressure Effects
Replies
1
Views
1K
Automotive Why Do Marine Diesel Engines Have Different Firing Orders?
Replies
3
Views
2K
Automotive Does vehicle weight have an effect on torque capacity of the gearbox?
Replies
5
Views
4K
Automotive Ozone Enhanced Combustion of Water/Diesel Emulsion in CI Engines
Replies
6
Views
2K
Determine pump spec necessary to overcome leak
Replies
10
Views
2K
Automotive Finding the Peak Pressure of a Diesel Injection Pump
Replies
9
Views
4K
Automotive Poor Man's Hydrostatic drive: power steering pump as motor?
Replies
19
Views
3K
Automotive BMW ROD Bearing problems
Replies
5
Views
145
Automotive Diesel engine parts for post-treatment of diesel engine gas exhaust
Replies
2
Views
1K
Automotive Topology optimization of an engine's cylinder block
Replies
14
Views
841

Hot Threads

Recent Insights

Back
Top