What Is the Ventilation Box Near the Floor?

  • Thread starter Thread starter Undoubtedly0
  • Start date Start date
  • Tags Tags
    Unit Ventilation
AI Thread Summary
The ventilation box near the floor is identified as a baseboard finned-tube radiator, which can be either electric or hydronic. Users noted that it is typically warm to the touch during cold days, indicating its function in heating. The discussion included a request for clarification on its name and purpose, with a link provided for further reference. The original poster expressed gratitude for the clarification received. This type of heating system is commonly found in many homes.
Engineering news on Phys.org
Baseboard finned-tube (fintube) radiator: http://www.zehnder-rittling.com/downloads/rittling-finned-tube/

It may be electric or hydronic.
 
russ_watters said:
Baseboard finned-tube (fintube) radiator: http://www.zehnder-rittling.com/downloads/rittling-finned-tube/

It may be electric or hydronic.

Thanks Russ, you have answered my question. I imagine it is electric.
 

Thread 'Bubble formation in 4 mm gap vessel'

How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
View full post »
Thread 'What type of toilet do I have?'

Thread 'What type of toilet do I have?'

I was enrolled in an online plumbing course at Stratford University. My plumbing textbook lists four types of residential toilets: 1# upflush toilets 2# pressure assisted toilets 3# gravity-fed, rim jet toilets and 4# gravity-fed, siphon-jet toilets. I know my toilet is not an upflush toilet because my toilet is not below the sewage line, and my toilet does not have a grinder and a pump next to it to propel waste upwards. I am about 99% sure that my toilet is not a pressure assisted...
View full post »

Thread 'Thread No-Go plug gage allows 3 turns to enter. That's too many!'

After over 25 years of engineering, designing and analyzing bolted joints, I just learned this little fact. According to ASME B1.2, Gages and Gaging for Unified Inch Screw Threads: "The no-go gage should not pass over more than three complete turns when inserted into the internal thread of the product. " 3 turns seems like way to much. I have some really critical nuts that are of standard geometry (5/8"-11 UNC 3B) and have about 4.5 threads when you account for the chamfers on either...
View full post »

Similar threads

Calculating Box Stability: An Energy Approach
Replies
14
Views
4K
Motorizing a TV mount
Replies
9
Views
2K
Is this egg-laying or something else?
Replies
9
Views
3K
What SI Gear Standards Do You Use?
Replies
8
Views
2K
Trying to intuit the unit impulse response
Replies
6
Views
2K
B Looking for context for a textbook quote
Replies
9
Views
2K
What is the final speed of a box sliding down a ramp onto a horizontal floor?
Replies
4
Views
2K
What is the International Standard for Quantifying Funk?
Replies
19
Views
3K
Why Does the Filament Box in a CRT Electron Gun Have Multiple Pins?
Replies
12
Views
2K
HVAC Efficiency of a homemade Air Conditioning unit
Replies
13
Views
7K

Hot Threads

Recent Insights

Back
Top