Angle of inclination of the projectile: θ

AI Thread Summary
The discussion revolves around the calculation of the angle of inclination (θ) for a projectile using kinematic equations. The initial equations presented include d = at + ½ at^2, which leads to confusion regarding the variables used, particularly 'a' for acceleration and 'u' for initial speed. Participants point out that the correct form of the equation should include 'u' as the initial velocity, leading to the proper equation d = ut + (1/2)at^2. The calculated angle of 29.8 degrees is questioned as incorrect, prompting a request for clarification on the calculations. The conversation emphasizes the importance of using the correct variables and equations in projectile motion analysis.
jillz
Messages
15
Reaction score
0
d = at + ½ a t^2

Horizontally: 7.12m = a cos θ t

at = 7.12m/ cos θ

Vertically: 10m = a sin θ t + ½ g t^2

10m = (7.12m/ cos θ ) *sin θ + ½ g t^2 = 7.12m tan θ + ½ g t^2

10m = 7.12m tan θ + ½ g t^2

10m = 7.12m tan θ + ½ g 1.1^2g

Solve for θ

Angle of inclination of the projectile: θ = 29.8o

This answer (29.8) is wrong...that much I know; what did I do/where did I go wrong in my calcs??
 
Physics news on Phys.org
Well, what's the question? What is "a"-- acceleration? Your first equation is incorrect, if so: d=ut+(1/2)at^2
 
that's interesting; my teacher says to use a for acceleration... what is 'u'
 
u is initial speed, sometimes denoted v_i. One does normally use a for acceleration, but that equation is not correct. See http://www.glenbrook.k12.il.us/GBSSCI/PHYS/Class/1DKin/U1L6a.html for the kinematic equations.
 
Last edited by a moderator:
'u' is the variable for what??

if 'a' is acceleration and I'm not supposed to use 'u', then shouldn't the equation be d=at+(1/2)at^2 ??
 
ok, thanks!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top