Calculating Angle for Accurate Shooting

  • Thread starter Thread starter mathcrzy
  • Start date Start date
  • Tags Tags
    Angle
Click For Summary
A hunter aiming at a target 130 m away with a bullet speed of 300 m/s will miss by 0.9 m due to gravitational drop. The bullet takes approximately 0.43 seconds to reach the target, during which it experiences a gravitational acceleration of 9.8 m/s². To accurately hit the target, the gun must be aimed at a specific angle, which can be calculated using trigonometric functions. The relationship between the distance fallen and the horizontal distance can be visualized as a right triangle, allowing for angle calculations using tangent and sine functions. Diagrams are recommended for clearer understanding of the trajectory and angle adjustments needed for accurate shooting.
mathcrzy
Messages
47
Reaction score
0
A hunter aims directly at a target (on the same level) 130 m away.

(a) If the bullet leaves the gun at a speed of 300 m/s, by how much will it miss the target?
.9 m

(b) At what angle should the gun be aimed so the target will be hit?
_____°
 
Physics news on Phys.org
1. How much time does the bullet take to reach the target, assuming its speed is constant?

2. What is the gravitational acceleration acting upon the bullet over this time?

3. What is the formula for distance dropped due to constant acceleration and zero initial velocity?

4. How far does the bullet fall due to the acceleration over the time of travel?

5. Calculate the tangent for the distance fallen vs. the distance to the target.
 
1. .43 seconds

2. 9.8m/s^2

3. ?

4. .9m in 130 m

5. ?
 
Y and X components of motion here are separate things, so in number 3 u treat the bullet falling as a separate part, where a=g. (You already have T, so just look for the formula that works) basically what u did to obtain number 4, just that you write your formula and variables down for Y component of motion.

5.I believe is trigonometry, SOH,CAH,TOA. The tangent of distance fallen vs the distance travelled, is visualized much clearer if you do a diagram, you know that distance travel is a straight parallel line on the X axis, and distance fallen is a distance in the Y axis, if you draw this you will get a right triangle. There you can calculate the angle that the bullet falls, using Angle = Tan Y/X (TOA). If you know that the bullet shot at 0 degrees will fall Y distance at a X degree angle, what would happen if you shoot it at a +X angle?

(draw diagrams, it makes it much easier to visualize)
 
i figured out the hypotenuse=130.0031153. now how do i figure out the angle?
 
Hints:

What does at2/2 equal?

Also, remember sin(Angle)=opposite/hypotenuse.
 
Thread 'Correct statement about size of wire to produce larger extension'
The answer is (B) but I don't really understand why. Based on formula of Young Modulus: $$x=\frac{FL}{AE}$$ The second wire made of the same material so it means they have same Young Modulus. Larger extension means larger value of ##x## so to get larger value of ##x## we can increase ##F## and ##L## and decrease ##A## I am not sure whether there is change in ##F## for first and second wire so I will just assume ##F## does not change. It leaves (B) and (C) as possible options so why is (C)...

Similar threads

  • · Replies 17 ·
Replies
17
Views
15K
  • · Replies 4 ·
Replies
4
Views
2K
Replies
4
Views
2K
  • · Replies 1 ·
Replies
1
Views
3K
  • · Replies 4 ·
Replies
4
Views
7K
  • · Replies 4 ·
Replies
4
Views
5K
  • · Replies 1 ·
Replies
1
Views
5K
  • · Replies 9 ·
Replies
9
Views
3K
  • · Replies 4 ·
Replies
4
Views
7K
  • · Replies 10 ·
Replies
10
Views
4K