Calculating Properties of a Transverse Wave on a Rope

AI Thread Summary
The discussion revolves around calculating properties of a transverse wave on a rope represented by the equation y(x, t) = (0.710 cm) cos π [(0.400 cm^-1)x + (500 s^-1)t]. Key properties to determine include amplitude, period, frequency, wavelength, and speed of propagation. The amplitude is identified as 0.710 cm, while frequency and period are derived from the angular velocity of 500 s^-1. Wavelength and speed of propagation can be calculated using the relationships between angular velocity and wave number. The conversation emphasizes the importance of using the correct forms of wave equations to extract these properties effectively.
lordrrr
Messages
2
Reaction score
0

Homework Statement



A transverse wave on a rope is given by the following equation.
y(x, t) = ( 0.710 cm ) cos pi [(0.400 cm^-1)x + (500 s^-1)t]

From this, find the amplitude, period, frequency, wavelength and the speed of propogation.

Homework Equations



Well, I know that v=f*lambda. I also know the general equation for sinusodal models in the -x direction:

y(x,t)= A*cos2pi[(x/lamda)+(t/period)]

(I choose to use this particular equation because it ties in with the one given to me)


The Attempt at a Solution



This problem is driving me nuts. I should be able to just take out the units that it aligns with and get that for the answer, right? I took out the 0.71, so I found the amplitude. I found the frequency by dividing 500 by 2. I found the period by dividing 1/250. But I can't for the life of me find the wavelength or the speed of propogation, can anyone please help? Thanks very much!
 
Last edited:
Physics news on Phys.org
Can anyone please help? I'm so lost.
 
The form y(x,t) = A cos (kx-wt) is more appropriate here...k is equal to 2PI/lambda and
w = vk. So your amplitude is given, period and frequency can be derived from the value given for angular velocity (w), wavelength derives from the value for k...and your speed of propagation is found using angular velocity (w) and wave number (k). Good Luck!
 
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top