Calculating Time and Distance for Basketball Throw

  • Thread starter Thread starter runner1738
  • Start date Start date
  • Tags Tags
    Basketball
Click For Summary
SUMMARY

The discussion focuses on calculating the time and distance for a basketball throw, specifically when a player throws a ball at a velocity of 16 m/s and an angle of 53 degrees from a height of 2.746 m to a hoop at 3.048 m. The time to reach maximum height is established as 1.3 seconds. The trajectory can be modeled using parametric equations, where the horizontal distance (d) to the hoop can be calculated using the formula d = vx * t, with vx being the horizontal component of the initial velocity. The challenge lies in determining the distance to the hoop given the time of flight and the height difference.

PREREQUISITES
  • Understanding of projectile motion principles
  • Familiarity with parametric equations in physics
  • Knowledge of basic kinematics equations
  • Ability to perform trigonometric calculations for projectile angles
NEXT STEPS
  • Study the derivation of projectile motion equations
  • Learn how to apply kinematic equations to solve for time and distance
  • Explore the effects of air resistance on projectile motion
  • Investigate the use of simulation tools for visualizing projectile trajectories
USEFUL FOR

This discussion is beneficial for physics students, educators teaching projectile motion, and sports analysts interested in optimizing basketball shooting techniques.

runner1738
Messages
71
Reaction score
0
nelect: air friction
your teacher tosses a basketball. the ball gets through the hoop(lucky shot). the man stand 2.746 m and the throws the ball at an angle of 53 degrees with a velocity of 16 m/s, the hoop is 3.048 m.
note: the distance he is from the hook is not given.

the time it takes for the ball to reach its max height is 1.3, but how do you figure out long it takes to get to the hoop, then the next question is what is l being the length from the hoop

My issues: is the ball hits the hoop before it reaches the end of the parobola so how do you calculate that with the information given.
 
Physics news on Phys.org
is there anyway i can load the picture? maybe that will help?
 
if the difference in height is .302 and you are given vi and theta can you calculate how long it takes for the ball to reach that height? then subtract that value from the total time the ball would have been in the air for? i know it take 1.3 s to reach max h
 
s=ut+\frac{1}{2}at^2
 
The parabolic trajectory can be described as a parametic set of equations.

One should be able to describe x = x(t) and y = y(t), also vx = constant (because no air resistance) and vy(t) = vyo-gt.

So the time to get to the hoop is simply = d/vx, where d is distance between hoop and man, or it can be determined from the time it takes to get from launch point (man's hand) elevation to peak and then down again to the hoop elevation. The peak is where vy(t) = 0.
 
Last edited:
the equation i used was rf=ri+vit+1/2gt^2 and solved for t then subtracted t from 2.6 being the total time of the parobola, but how can i find the length x between the man and the hoop, now that i know the time it takes to get there?
 
So the time to get to the hoop is simply t = d/vx, where d is distance between hoop and man, or conversely, d = vx * t (no air resistance means no deceleration in the x-direction).
 

Similar threads

  • · Replies 2 ·
Replies
2
Views
10K
Replies
3
Views
4K
  • · Replies 1 ·
Replies
1
Views
2K
Replies
3
Views
3K
  • · Replies 3 ·
Replies
3
Views
4K
  • · Replies 16 ·
Replies
16
Views
2K
  • · Replies 1 ·
Replies
1
Views
2K
Replies
2
Views
7K
  • · Replies 27 ·
Replies
27
Views
7K
  • · Replies 6 ·
Replies
6
Views
11K