Circular Polarization: Explaining \beta z in Electric Field

Click For Summary
SUMMARY

The discussion centers on the concept of circular polarization generated by two dipole antennas oriented 90 degrees apart, with one radiating cos(ωt) and the other sin(ωt). The electric field is expressed as E(z, t) = E₀[cos(ωt - βz)âx + sin(ωt - βz)ây]. The relationship between the wave number β and the distance z is clarified, indicating that βz represents the spatial variation of the wave, while ωt accounts for temporal changes. The conclusion emphasizes that the wave's behavior can be understood through the combination of sinusoidal functions in both time and space.

PREREQUISITES
  • Understanding of dipole antennas and their orientation
  • Familiarity with wave equations and sinusoidal functions
  • Knowledge of wave number (β) and angular frequency (ω)
  • Basic principles of electromagnetic wave propagation
NEXT STEPS
  • Study the mathematical derivation of circular polarization in electromagnetic waves
  • Learn about the properties of dipole antennas and their radiation patterns
  • Explore the relationship between wave number (β) and wavelength (λ) in depth
  • Investigate the implications of phase shifts in wave propagation
USEFUL FOR

Electromagnetic engineers, physics students, and professionals involved in antenna design and analysis will benefit from this discussion, particularly those focused on wave propagation and polarization techniques.

jeff1evesque
Messages
312
Reaction score
0
Statement:
Consider two dipole antennas, oriented 90degrees apart [imagine the x-y plane, let "a" be the dipole oriented along the x-axis, and the "b" be the dipole oriented along the y-axis]. If "a" dipole radiates cos(\omega t) and "b" dipole radiates sin(\omega t), the field radiated by the two antennas will be circularly polarized:

\vec{E}(z, t) = E_{0}[cos(\omega t - \beta z)\hat{x} + sin(\omega t - \beta z)\hat{y}] (#1)

Relevant Question:
In terms of a specific distance, say in the \hat{x} direction, the cosine function has traveled a distance \omega t (as did the sine function in it's respective axis). But I don't understand why To find electric field at a given location in the \hat{z} direction, we subtract the distance traveled \omega t by the wave number times distance in z, or \beta z - for each component \hat{x}, \hat{y}. The wave number is the wavelength of the sinusoid per unit distance. What happens when we take this wave number \beta and multiply it by z? What does that represent, I cannot see the relation between the two (\omega t and \beta z)?

Does one unit length of z = 1 for \beta z \hat{x} and \beta z \hat{y} correspond to a length of \frac{2\pi}{\lambda} in the \hat{z} direction?
 
Engineering news on Phys.org
The wave is both sinusoidal in time and in space. Thus, if we were too look at the wave at a constant point in space, we expect that it should vary sinusoidally with angular frequency \omega over time. If we were to look at the wave at a constant point in time over space, we would expect that the wave would vary spacially sinuisoidally with respect to the angular frequency \beta, which is called the wave number. All they have done in your set of equations is combine these two effects into a single sinusoidal function.
 
Born2bwire said:
The wave is both sinusoidal in time and in space. Thus, if we were too look at the wave at a constant point in space, we expect that it should vary sinusoidally with angular frequency \omega over time. If we were to look at the wave at a constant point in time over space, we would expect that the wave would vary spacially sinuisoidally with respect to the angular frequency \beta, which is called the wave number. All they have done in your set of equations is combine these two effects into a single sinusoidal function.

That kind of made sense, but wasn't the kind of answer I was looking for haha. If someone could explain this in a different way, that would be great.

thanks
 
Hello,

Let's try to simplify the problem...

Assume we have linear polarization in x-direction i.e. E = \cos(\omega t - \beta z) \hat{x} or we can write it as E = cos(\beta z - \omega t) \hat{x}.

This wave is a traveling wave.. means that it moves in the direction of \hat{z}.

Try to plot E with respect to the distance at time (t = 0). This will give cosine wave with zero phase .. E = cos(\beta z)

Try to increase the time to t_1 for example. you will find the wave is shifted to the right. so this can be represented by subtracting z by the value of the shift say z1... E = cos(\beta (z - z_1)) = cos (\beta z - \beta z_1).

Assume that the wave is moving with velocity v. Then the time t1 need to move distance z1 is z1/v.

Substitute z1 by v*t1, we get
E = cos(\beta z - \beta v t_1)

By letting \beta * v = \omega, we have
E = cos(\beta z - \omega t_1)

So as a conclusion if t = T which is the time period of cosine, we will find that the wave moves a distance equal to the wavelength \lambda

I hope that I answered your question.
Good luck
 
Most likely this can only be answered by an "old timer". I am making measurements on an uA709 op amp (metal can). I would like to calculate the frequency rolloff curves (I can measure them). I assume the compensation is via the miller effect. To do the calculations I would need to know the gain of the transistors and the effective resistance seen at the compensation terminals, not including the values I put there. Anyone know those values?

Similar threads

  • · Replies 1 ·
Replies
1
Views
1K
  • · Replies 1 ·
Replies
1
Views
2K
  • · Replies 2 ·
Replies
2
Views
2K
  • · Replies 10 ·
Replies
10
Views
1K
  • · Replies 1 ·
Replies
1
Views
2K
  • · Replies 9 ·
Replies
9
Views
1K
  • · Replies 0 ·
Replies
0
Views
1K
Replies
5
Views
2K
  • · Replies 11 ·
Replies
11
Views
1K
  • · Replies 1 ·
Replies
1
Views
3K