Converting light power to luminance in Atlas Silvaco OLED simulation

  • Thread starter halaoui12
  • Start date
  • Tags Tags
    Power
5 replies · 3K views · last reply
halaoui12
Messages
5
Reaction score
0
I am trying to simulate an OLED via Atlas SilvacoI want to know how to convert light power (watt/um) into luminance (cd/m2) or the syntax to do that in Atlas silvaco.THANKS
 
Line graph titled OLED IV Curve, data from organicex08.log, plotting anode current in A against anode voltage in V from 0 to 7 V; the red curve stays near zero until about 2.5 V, then rises steeply to about 0.03 A at 7 V.
 
halaoui12 said:
how to convert light power (watt/um) into luminance (cd/m2)

Once you get the units straightened out (watt/um does not appear to be a valid unit of luminance), try this site:
https://app.knovel.com/uc/

(unless that "um" term is micron, indicating wavelength. then you need to specify the bandwidth to get the total power. rather a can-of-worms i would say)

Cheers,
Tom
 
Last edited:
Thank you for your reply
this site did not work (https://app.knovel.com/uc/)
for the conversion there is an integration over the wavelength which must be carried out over the visible spectrum. but I can't insert this integration into the Atlas Silvaco code!!!
 
halaoui12 said:
this site did not work (https://app.knovel.com/uc/)
renormalize said:
Site works fine for me using Google Chrome in Windows 10 Home.
Works for me as well with Windows 10 and Firefox.

@halaoui12 -- maybe some Internet problem with some blocking by your country?

Screenshot of the Knovel Unit Converter page with Gauge Conversions selected, showing empty INPUT and OUTPUT panels, a CONVERT button, Flip Units and Clear All buttons, and Significant Digits set to 4.