Proper way to export s2p for 100ohm differential line simulation

  • Thread starter yefj
  • Start date
0 replies · 530 views
yefj
Messages
166
Reaction score
2
Hello,I have built a structure as you can see the differential excitation is creating characterictic impedance of 100 and 120 ohms on both ports.

The dillema starts when I exports the S2P file.
What reference impedance to use on export ?
When I export at 50 ohm and then present tdr with reference impedance of 100 ohm and 50 ohm I get toally different plots.
What is the proper way to handle this situation?
Thanks.
S2P file:
curved_line_via_updated_full_1_1
python script:
tdr_full_line_50_100
 
Attachments
  • Two stacked time-domain reflectometry plots of impedance against time from 0 to 2 ns, one referenced to 50 ohms (top) and one to 100 ohms (bottom), with dashed reference lines; the impedance trace differs markedly between the two.
    photo6.webp
    66.2 KB · Views: 1
  • Line plot titled Line Impedance, impedance in ohms against frequency in GHz from 30 to 40 GHz, with two single data points at 35 GHz: a red circle near 101 ohms labelled 1(1) and a green triangle near 121 ohms labelled 2(1).
    photo5.webp
    70.6 KB · Views: 1
  • Screenshot of the TOUCHSTONE Export Options dialog with Type set to S-Parameters, Format MA, Renormalize Impedance at 50 ohm, and frequency range Fmin 0.01, Fmax 70, 7001 samples.
    photo4.webp
    32.8 KB · Views: 1
  • 3D EM simulation view of a teal dielectric board with two yellow parallel differential traces that bend, with red boxed port regions at each end and a u, v, w axis triad.
    photo3.webp
    52 KB · Views: 1
  • 3D EM simulation model of a yellow substrate plate with three parallel traces that bend at a corner, with red-outlined port faces at both ends and a u, v, w axis triad.
    photo2.webp
    43.8 KB · Views: 1
  • 3D CAD view of a stripline-style interconnect with a cylindrical via and a coordinate triad labelled u, v and w, showing copper layers with gaps between them.
    photo1.webp
    33.2 KB · Views: 1