Creating a Variable Resistor Using a Bare Resistance Wire and Sliding Contact

  • Thread starter Thread starter Dadface
  • Start date Start date
  • Tags Tags
    Resistance
Join the discussion
Registration is free. Ask a follow-up in this thread, or start your own.
Sign up Log in
2 replies · 2K views
Dadface
Messages
2,489
Reaction score
105
You have a length of bare resistance wire a fixed contact and a sliding contact.Using these things only how can you make a variable resistor such that when the sliding contact is moved along the wire the resistance varies smoothly from zero to a maximum and then to zero?You are not allowed to cut the wire.
 
Engineering news on Phys.org
Form the wire (of length L and resistance R) into a closed loop. If the sliding contact is at a distance d from the fixed contact, the resistance will be the equivalent parallel resistance from segments of length d and L-d, which should be:

R_eff = [R(d/L)*R((L-d)/L)]/[R(d/L)+R((L-d)/L)] = Rd(L-d)/(L^2),

and as d increases from 0, d(L-d) increases smoothly from 0 till d=L/2 (where R_eff is at its maximal value of R/4) and decreases smoothly to 0 after that (this part maps onto the common puzzle of maximizing the area of a rectangle of given perimeter, but if you don't like that, then the first derivative is L-2d, and the second is -2).
 
Well done Gokul 43201.