Designing Spur Gears: How-To, Materials & Factors

In summary, designing a spur gear requires research and knowledge of best design practices and consideration of factors such as materials and any other factors that may affect the gear. It is important to do thorough research before asking more specific questions.
  • #1
dhananjaya
2
0
How to design a spur gear?
which material is good?
What are the factors to be consider to design good spur gear?
 
Engineering news on Phys.org
  • #2
It depends.
It depends.
And it depends.

Waaaaayyyyy to general of questions to be asking. You need to do the up front research and read about the topics first. Then you will be able to ask questions that will actually be beneficial.
 
  • #3
dhananjaya said:
How to design a spur gear?
Use best design practice
which material is good?
The material best suited to your application
What are the factors to be consider to design good spur gear?
Anything affecting the gear.


Not to be rude, but what's with the ridiculous questions?
 

Related to Designing Spur Gears: How-To, Materials & Factors

1. What materials are commonly used for designing spur gears?

The most commonly used materials for designing spur gears are steel, cast iron, and bronze. These materials are chosen for their strength, durability, and resistance to wear and tear.

2. What factors should be considered when designing spur gears?

When designing spur gears, factors such as tooth size, number of teeth, pressure angle, and pitch diameter should be taken into account. The gear's intended use and load bearing capacity should also be considered.

3. What is the process for designing spur gears?

The process for designing spur gears involves determining the gear's intended use, selecting the appropriate materials, calculating the gear's dimensions and tooth profile, and performing strength and stress analysis. Computer-aided design (CAD) software is often used to assist in this process.

4. How do I determine the appropriate pressure angle for my spur gears?

The pressure angle is typically determined based on the gear's intended use and the materials being used. A smaller pressure angle, such as 14.5 degrees, is more suitable for higher speeds and lighter loads, while a larger pressure angle, such as 20 degrees, is better for heavier loads and slower speeds.

5. Can spur gears be used for high-speed applications?

Yes, spur gears can be used for high-speed applications as long as the appropriate materials and pressure angle are chosen. It is important to consider factors such as tooth size and number of teeth to ensure the gear can handle the speed and load requirements. Lubrication and proper maintenance are also important for high-speed spur gears.

Similar threads

  • General Engineering
Replies
1
Views
2K
  • Mechanical Engineering
Replies
8
Views
1K
  • Mechanical Engineering
Replies
4
Views
3K
Replies
20
Views
5K
  • Mechanical Engineering
Replies
3
Views
235
  • General Engineering
Replies
10
Views
3K
Replies
2
Views
2K
Replies
2
Views
1K
Replies
2
Views
3K
Replies
4
Views
1K
Back
Top