Diffraction Problem: Solve for O

  • Thread starter Thread starter jcpwn2004
  • Start date Start date
  • Tags Tags
    Diffraction
AI Thread Summary
The discussion focuses on solving a diffraction problem related to light passing through the pupil of the eye. It emphasizes the impact of wavelength on diffraction effects, noting that larger wavelengths blend colors faster, suggesting red is the first to blend. Participants discuss the need to reference textbook sections on "limiting angle of resolution" for relevant formulas. There is confusion regarding calculations for part b, particularly the values used and the resulting answer of 0.06, which is questioned for accuracy. The conversation highlights the importance of showing calculations clearly to facilitate understanding and verification.
jcpwn2004
Messages
49
Reaction score
0

Homework Statement



http://img73.imageshack.us/img73/2750/physicsnm5.jpg

Homework Equations



asinO=m(wavelength)

The Attempt at a Solution



I don't really know where to start...
 
Last edited by a moderator:
Physics news on Phys.org
I'm pretty sure this question doesn't make any sense.
 
Hi jcpwn2004,

For part a, they are saying that diffraction effects occurring as the light passes through the pupil can cause the eye to not be able to perceive the individual dots. Would these diffraction effects be greater for larger or smaller wavelengths? Once you know that you can determine the color.

For part b there are some formulas that I think should be derived in your textbook, and those sections would probably be good to read to understand how to use the formulas. Try to find a section titled something like "limiting angle of resolution" or "resolution of apertures", and you will probably find formulas for rectangular and circular apertures. What do you get?
 
the diffraction effects would be less for larger wavelengths, therefore larger wavelengths would blend the fastest? So red would be the first color to blend?

for the 2nd part i have sin0=1.22(wavelength)/D and used 480nm for violet light and got .06 which isn't right :(.
 
It's difficult to tell what you did since you did not show the numbers you plugged in. What numbers did you use, and how did you get the answer of 0.06?
 
alphysicist said:
It's difficult to tell what you did since you did not show the numbers you plugged in. What numbers did you use, and how did you get the answer of 0.06?

I did a=L(wavelength)/Y so .005=L(400nm)/.002 and got L=25m which is off, the final answer should be 20.5

Is my answer for part a correct though?
 
Last edited:
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top