Electric Wire in Earth's Magnetic Field: Tapping into Electromagnetic Energy

  • Context: Graduate 
  • Thread starter Thread starter crx
  • Start date Start date
  • Tags Tags
    Sky Wire
Click For Summary

Discussion Overview

The discussion revolves around the concept of tapping into electromagnetic energy using a long, vertical, grounded electric conductor situated at the equator, moving through Earth's magnetic field due to the planet's rotation. Participants explore the feasibility of generating electrical energy through electromagnetic induction, considering various factors such as the nature of magnetic fields and the requirements for current generation.

Discussion Character

  • Exploratory
  • Technical explanation
  • Debate/contested
  • Conceptual clarification

Main Points Raised

  • One participant proposes that a long, vertical conductor could generate energy through electromagnetic induction as it moves through Earth's magnetic field.
  • Another participant questions whether the magnetic field rotates with the magnet or remains static, suggesting that this distinction affects energy generation.
  • Some participants reference the homopolar generator concept, indicating that a uniform magnetic field does not imply movement.
  • A participant argues that a closed loop of wire would not generate current due to equal and opposing electromotive forces (emf) on either side of the loop.
  • Another participant introduces the idea of the agonic line and its relation to magnetic angles, questioning how the Earth's magnetic field behaves relative to the conductor's motion.
  • One participant suggests that the circuit could be conceptualized as a connection between the wire and the atmosphere, considering the return path to be the ionized particles in the environment.
  • There is a discussion about whether a potential difference can be observed in a conductor moving through a magnetic field, even if it is not part of a closed circuit.
  • Some participants express skepticism about the practicality of harnessing energy from this setup, despite theoretical possibilities.

Areas of Agreement / Disagreement

Participants express multiple competing views regarding the feasibility of energy generation from the proposed setup, with no consensus reached on the effectiveness of the method or the behavior of the magnetic field.

Contextual Notes

Participants highlight limitations regarding the assumptions about magnetic field behavior, the nature of flux changes, and the practical challenges of energy extraction in this scenario. There are unresolved questions about the implications of the agonic line and the periodicity of magnetic field changes.

crx
Messages
80
Reaction score
0
Lets say that we have a very long, vertical, grounded, electric conductor planted at the equator (something similar with the "space tether" satellite, but here on Earth). Now we can consider that the electric wire is moving through Earths magnetic field with the Earths rotational speed at that point. My question is if we could tap electric energy from the electromagnetic induction in the wire, considering that we can remove the accumulated electrical charge at the tip of the wire, let's say by spraying water mist...?
 
Physics news on Phys.org
crx said:
Lets say that we have a very long, vertical, grounded, electric conductor planted at the equator (something similar with the "space tether" satellite, but here on Earth). Now we can consider that the electric wire is moving through Earths magnetic field with the Earths rotational speed at that point. My question is if we could tap electric energy from the electromagnetic induction in the wire, considering that we can remove the accumulated electrical charge at the tip of the wire, let's say by spraying water mist...?

Does a magnet's field rotate with the magnet, or does it stand still while the magnet rotates?
 
... just like an homopolar generator, the magnetic field is considered uniform and homogeneous, so you cannot tel if its "moving" or not...
 
crx said:
... just like an homopolar generator, the magnetic field is considered uniform and homogeneous, so you cannot tel if its "moving" or not...
Are you quoting something?
 
If you want electrical energy, you need a circuit. If you have a circuit, you have a loop of wire. You get a current in the wire if you have a changing magnetic flux through it. I don't see how the flux is changing through this loop.
 
Vanadium 50 said:
I don't see how the flux is changing through this loop.
You believe the Earth's magnetic field rotates with the earth? Or you believe one can't tell?
 
Follow-up question; are you familiar with the "agonic line?"
 
I have heard of the agonic line, and at one time could have defined it. I know it's related to grid magnetic angle, but couldn't define it today.

That's the reason I don't quite see how this would work. If the Earth's magnetic field were stationary and the Earth rotated through it, the magnetic field on the Earth's surface would change with a 24-hour periodicity. Instead, as viewed from the Earth's surface, it is relatively static. (Yes, there are variations, but they happen on a longer timescale) So this loop has essentially a constant magnetic flux inside it.
 
Vanadium 50 said:
If the Earth's magnetic field were stationary and the Earth rotated through it, the magnetic field on the Earth's surface would change with a 24-hour periodicity. Instead, as viewed from the Earth's surface, it is relatively static. (Yes, there are variations, but they happen on a longer timescale) So this loop has essentially a constant magnetic flux inside it.
There is a minor controversy raging as to whether or not a magnet's field rotates with the magnet. This got started as a result of one of Faraday's meticulous experiments which seemed to indicate a magnet's field does not rotate with the magnet.

Here's the problem: even if we can prove by some other means the field stands still while the Earth moves through it how can we generate current from that in a loop?
 
  • #10
zoobyshoe said:
There is a minor controversy raging as to whether or not a magnet's field rotates with the magnet.

To be honest, I am not 100% sure what that means, as a field is at its heart a set of numbers for each point in space that describe the results of a measurement, were you to make it. I can easily see how people can get tangled up in terminology while they are discussing what is "really" happening.

That's why I am trying to think in terms of flux. If the total flux is the same at t and t + \delta t, it doesn't really matter how it got that way, nor how many field lines entered and then exited. All that matters is the difference in flux is zero, so there's no emf.
 
  • #11
Assume that there is a change of flux then you cannot tap energy by having a closed loop of conductor because in effect the whole loop becomes equivalent to a single conductor the emf induced on both sides of the loop being equal but opposing each other making the net current zero.If we think of the space tether in terms of a conductive loop then power will be generated because the return circuit will be stationary with respect to the wire.
 
  • #12
Dadface said:
Assume that there is a change of flux then you cannot tap energy by having a closed loop of conductor because in effect the whole loop becomes equivalent to a single conductor the emf induced on both sides of the loop being equal but opposing each other making the net current zero.
Exactly. Whether or not the field is rotating with the magnet you can't "tap" that energy with a closed loop.
 
  • #13
So we're up to how many reasons why this won't work?
 
  • #14
Dadface said:
Assume that there is a change of flux then you cannot tap energy by having a closed loop of conductor because in effect the whole loop becomes equivalent to a single conductor the emf induced on both sides of the loop being equal but opposing each other making the net current zero.If we think of the space tether in terms of a conductive loop then power will be generated because the return circuit will be stationary with respect to the wire.

I'm thinking that the circuit would be made up by the wire between the Earth and the atmosphere. The return path would be the ionized particles that fall back on the Earth, like rain, light-bolts etc. Because the return path is so dispersed (basically the whole Earth surface), we could consider that Earth and the atmosphere have an "infinite" capacitance. In this case we would have a circuit made up by a wire connected to two infinite capacitance bodies, so we don't need a return path. My problem is that I'm not sure if we could "see" a separation of charges inside the wire and on the surface of "capacitors" if the "capacitors" themselves move in the same way as the wire does in the magnetic field. I'm very sure that this is the same problem as in the case of an "homopolar generator".
In other words... Can we observe a potential difference at the ends of an electrical conductor that is free, straight, not part of a circuit, using an electroscope attached to the each end of the wire, that moves with constant speed in an homogeneous, uniform and constant magnetic field , with B at 90"' to the wire?
 
  • #15
This would work in theory. The magnetic field with respect to a location on the ground would change with 24 hours interval.. But, would be almost impossible to harness.
 
  • #16
henxan said:
This would work in theory. The magnetic field with respect to a location on the ground would change with 24 hours interval..

Why do you say this? Doesn't a compass needle point in the same direction no matter what time of day it is?
 
  • #17
Vanadium 50 said:
Why do you say this? Doesn't a compass needle point in the same direction no matter what time of day it is?

look at image of Earth'smagnetic field
 
  • #18
Vanadium 50 said:
I have heard of the agonic line, and at one time could have defined it. I know it's related to grid magnetic angle, but couldn't define it today.

That's the reason I don't quite see how this would work. If the Earth's magnetic field were stationary and the Earth rotated through it, the magnetic field on the Earth's surface would change with a 24-hour periodicity. Instead, as viewed from the Earth's surface, it is relatively static. (Yes, there are variations, but they happen on a longer timescale) So this loop has essentially a constant magnetic flux inside it.
Yep, that's what made me mention it. The anagonic angle is the difference between magnetic north and true north. The agonic line is the line around the surface of the Earth along which the magnetic and rotational poles line up (anagonic angle = 0). It passes close to Michigan (where I live) and Florida. It has been there since before I was born, and will be long after I die. Since this line doesn't go 'round the Earth every twenty-four hours, the magnetic field must rotate with the planet. So, the wire would be in a staic magnetic field, and no voltage would be produced.

An idea not too dissimilar from yours was attempted once on the Shuttle, as I recall. A long wire was to be dragged out behind the orbiter while it orbitted the Earth, making its sin-wave ground track. As the orbiter moves from north to south and back again, the alternating magnetic field would produce electricity to power some of the science equipment onboard. Unfortunately, once the tether had spooled out to its full length, it detatched from the orbiter and just kept going.

I don't know of they ever tried again.
 

Similar threads

  • · Replies 2 ·
Replies
2
Views
2K
  • · Replies 5 ·
Replies
5
Views
2K
  • · Replies 2 ·
Replies
2
Views
2K
  • · Replies 3 ·
Replies
3
Views
2K
  • · Replies 11 ·
Replies
11
Views
3K
  • · Replies 4 ·
Replies
4
Views
2K
  • · Replies 2 ·
Replies
2
Views
2K
  • · Replies 22 ·
Replies
22
Views
2K
  • · Replies 7 ·
Replies
7
Views
2K
  • · Replies 41 ·
2
Replies
41
Views
7K