Electrostatics: Conducting Sphere in Uniform Electric Field

  • Thread starter Thread starter MetsFan09
  • Start date Start date
  • Tags Tags
    Electrostatics
AI Thread Summary
A small conducting sphere with mass M and charge Q is suspended in a uniform electric field E, making a 30-degree angle with the field. The tension in the string was calculated as 0.023 N, but clarification was needed on how to relate the electric field to the tension using Newton's third law. The magnitude of the electric field was calculated as approximately 444,444.4 N/C, though the method used was questioned. If the string is cut, the sphere will move down and to the right due to the forces acting on it. The discussion emphasizes the importance of accurately analyzing forces and using correct formulas in electrostatics problems.
MetsFan09
Messages
5
Reaction score
0

Homework Statement


A small conducting sphere of mass M is attached to a string of length L. It is at rest in a uniform electrical field of magnitude E directed due right. The sphere has a charge of Q and the string makes a 30 degree angle with the electric field.

smqe85.jpg


a. Calculate the tension in the string if M = .002 kg, L = .45 M, Q = 10*10^-6 columbs

b. Calculate the magnitude of the Electric field.

c. Desrcibe what the mation of the conducting sphere would be if the string is cut

Homework Equations


E = k(q/r^2)


The Attempt at a Solution


a. Fg = Ft cos Theta
(.002 *10) = ftcos30
ft = .023 N

b. E kq/r^2
E = 9 * 10 ^9(10*10^-6)/.45^2 = 444444.4 N/C

c. The coundcting sphere will move down and to the right

I'm not if I got any of the parts can someone please help me out
 
Physics news on Phys.org
a) should be correct
b) what you want is the magnitude of the uniform electric field, not the field produced by the point charge, might want to use Newton third law to relate columb force to tension in part a
c) if you remove the string what are the forces acting on the sphere?
 
ok i got a and c. but I'm having trouble with b. I'm not getting how i should relate the 3rd law to relate the columb force to the tension
 
well coulomb force can be expressed as F=qE , draw a force diagram like in part a and sum of forces equal zero...
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top