Eyepiece for refractor telescope

  • Context: Stargazing 
  • Thread starter Thread starter PhysicoRaj
  • Start date Start date
  • Tags Tags
    Telescope
Join the discussion
Ask a follow-up here, or get your own question answered by working scientists, mathematicians and engineers — people, not an autocomplete.
Real named experts · corrections over time · the nuance an AI answer skips
5 replies · 3K views
PhysicoRaj
Gold Member
Messages
538
Reaction score
49
Hi, Iam thinking of making my own telescope and I have a magnifying glass lens, biconvex, about 10 cm in diameter and 27 cm focal length. I think it would be better as the objective. For the eyepiece, what type of lens, of what focal length and aperture diameter should I use? (I hope to identify the rings of Saturn... I may not be able to .. but at least the craters of the moon are okay.)
Thanks.
 
Astronomy news on Phys.org
Then what type of a configuration you suggest(focal length combination and size)? May be I will try to get both new, the eyepiece and the objective.
 
PhysicoRaj said:
Hi, Iam thinking of making my own telescope and I have a magnifying glass lens, biconvex, about 10 cm in diameter and 27 cm focal length. I think it would be better as the objective. For the eyepiece, what type of lens, of what focal length and aperture diameter should I use? (I hope to identify the rings of Saturn... I may not be able to .. but at least the craters of the moon are okay.)
Thanks.

The ratio of the objective and eyepiece focal lengths provides the (angular) magnification, so the shorter the focal length of the eyepiece, the greater the magnification. Using a negative (concave) lens for the eyepiece is worse than a positive lens when you are trying to look through the telescope (see Galilean vs. Keplerian telescopes).

http://depts.washington.edu/hssexec/committee/hss_galileo.html

The f/# of your objective is 2.7, so the f-number of your eyepiece does not need to be much larger than 2.7 as well.

This simple analysis completely ignores aberrations, which are likely to be large.
 
A common simple refractor design is a 100 mm doublett lens with a focal length of 1000 mm. For maximum FoV you'd need a 50 mm eyepice. Together with a 2xbarlow lens and a second eyepiece around 12 mm. This way you'd get magnifications of 20, 40, 83 and 167.

I'd recommend that you start by getting your hands on a book on building telescopes and checking if there is an amateur astronomer club nearby. There are a lot of gotchas if you haven't built a telescope before.
 
Thanks a lot...