Finding Ay using moment equation with two point loads

  • Thread starter Brendan Webb
  • Start date
  • Tags Tags
    Moment
2 replies · 2K views · last reply
Brendan Webb
Messages
26
Reaction score
0
Thread moved from the technical forums, so no HH Template is shown.
I have come to the point in the equation where I need the moment equation to solve for Ay. I am not sure how to get By in term of Ay though. The moment equation I get for Ay is:

∑Mb = 8(-P2) - 20(-P1) - 32(Ay) + 15Ax

I know P1 = 270 - P2

However I am not sure if I even have Ay and Ax right in the ∑Mb equation. Where do I go from here?
 
Attachments
  • Handwritten free-body diagram of a beam labelled A, B and C with lengths 8m, 12m, 4m and 8m, supports at A and B, point loads P1 and P2, and equations including P1 + P2 = 270 and x = 405 - 1.5P1.
    20160209_084350.jpg
    33.2 KB · Views: 470
  • Cable diagram with supports A and B, load points P1 at 12 m and P2 at 24 m from A, and dimensions 12 m, 12 m, 8 m, 15 m, 8 m and 4 m, with the cable sloping up from A to B.
    20160209_084057.jpg
    48.9 KB · Views: 452
Because of the boundary conditions in points A and B, TotalMb and TotalMa should be zero. You could write two different equations from here, and 2 more equations comes from TotalFy and TotalFx. And here you go, you have 4 equations and 4 unknowns, which you can solve for all the unkowns
 
Do i have the ΣMb equation right if I wrote it equal to 0?

Ok so for the Fy = 0 equation it would be -Ay -P1 - P2 +By = 0

For the Fx = 0 equation it would be -Ax + Bx = 0 (However, is Ax and Bx the total force across the cable or are the broken up into three components?)