Finding the Density of a given object

  • Thread starter Thread starter iJpawn
  • Start date Start date
  • Tags Tags
    Density Volume
AI Thread Summary
The density of an object is calculated by dividing its mass by its volume. The mass of Earth is approximately 6x10e+24 kg, and its radius is 4000 miles, which converts to about 6400 km. The volume is calculated using the formula V=4/3π(r)^3, leading to a volume of approximately 1x10e+12 m^3 after proper unit conversion. The resulting density calculation of 6x10e^12 kg/m^3 is incorrect, as it is too high, indicating a possible error in the volume conversion from cubic kilometers to cubic meters. It is recommended to show all calculations with units clearly to identify any mistakes.
iJpawn
Messages
3
Reaction score
0
The density of an object equals its mass divided by its volume. The mass of Earth is 6x10e+24 and its radius is 4000 miles (1.61km = 1mile). What is the density of the Earth in kg/m^3?V=4/3pi(r)^3. D=M/VConverting 4000 to Km, I get 6400. After plugging it into the Volume equation, I end up with approximately 1x10e+12. I divide 6x10e+24 by 1x10e+12, and my result is 6x10e^12. Is this the correct way to do the given problem? My answer sheet from my professor does not state this as any of the answers, and I can't think of any other way to approach this equation.
 
Physics news on Phys.org
The answer should be in kg/m^3.
 
iJpawn said:
The density of an object equals its mass divided by its volume. The mass of Earth is 6x10e+24 and its radius is 4000 miles (1.61km = 1mile). What is the density of the Earth in kg/m^3?V=4/3pi(r)^3. D=M/VConverting 4000 to Km, I get 6400. After plugging it into the Volume equation, I end up with approximately 1x10e+12. I divide 6x10e+24 by 1x10e+12, and my result is 6x10e^12. Is this the correct way to do the given problem? My answer sheet from my professor does not state this as any of the answers, and I can't think of any other way to approach this equation.
Your calculation is hard to follw if you do not state the units at every point. The answer is much too high.
I suspect you erred in converting cu km to cu m.
What units are the given mass in?
 
The mass of Earth is given in 6x10e+24kg, sorry for not posting it earlier!
 
iJpawn said:
The mass of Earth is given in 6x10e+24kg, sorry for not posting it earlier!
Ok, but repost your calculation showing units at every step. Omit no steps.
 
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top