Finding the Image Location for Two Lenses in Contact

Click For Summary
To find the image location for two lenses in contact, first apply the lens formula to determine the image formed by the first lens, treating it as an object for the second lens. The focal lengths of both lenses are positive, indicating they are likely convex lenses. The combined focal length for two lenses in contact can be calculated using the formula 1/f = 1/f1 + 1/f2. After finding the image from the first lens, use it as the object for the second lens to find the final image location. Proper attention to sign conventions is crucial for accurate results.
Mulz
Messages
124
Reaction score
6

Homework Statement


Two lenses with the focal length of 50 mm are placed tightly. An object is placed 130 mm away from the lenses. Where is the image generated by the lenses?

Homework Equations


\frac{1}{a}+\frac{1}{b}=\frac{1}{f}
L = f_{ocular} + f_{objective}

The Attempt at a Solution


[/B]
Frankly, I tried starting out by simply using the first equation. I got b to around 81 mm to the right.

I don't know if it's correct. The question never specifies which type of lens (convex or concave). Doesn't specify which kind of optical setup (meaning I don't know if to use the second equation). I thought about dividing the problem with respect to each lens but I don't know the kind of lenses used so I have no clue.
 
Physics news on Phys.org
Mulz said:

Homework Statement


Two lenses with the focal length of 50 mm are placed tightly. An object is placed 130 mm away from the lenses. Where is the image generated by the lenses?

Homework Equations


\frac{1}{a}+\frac{1}{b}=\frac{1}{f}
L = f_{ocular} + f_{objective}

The Attempt at a Solution


[/B]
Frankly, I tried starting out by simply using the first equation. I got b to around 81 mm to the right.

I don't know if it's correct. The question never specifies which type of lens (convex or concave). Doesn't specify which kind of optical setup (meaning I don't know if to use the second equation). I thought about dividing the problem with respect to each lens but I don't know the kind of lenses used so I have no clue.
You have solved half the problem and found the image formed by the first lens. This image serves as an "object" for the second lens so you need to apply the equation once more. Be careful with your signs. The kind of lenses these are should be obvious from their focal lengths, which are positive. See link below for how to treat multiple lens systems.

https://www.khanacademy.org/science/ap-physics-2/ap-geometric-optics/modal/v/multiple-lens-systems
 
Two thin lenses in contact are equivalent to a single thin lens whose focal length is given by 1/f = 1/f1 + 1/f2. (Serway). Then 1/i = 1/f - 1/o as usual.
 
Thread 'Correct statement about size of wire to produce larger extension'
The answer is (B) but I don't really understand why. Based on formula of Young Modulus: $$x=\frac{FL}{AE}$$ The second wire made of the same material so it means they have same Young Modulus. Larger extension means larger value of ##x## so to get larger value of ##x## we can increase ##F## and ##L## and decrease ##A## I am not sure whether there is change in ##F## for first and second wire so I will just assume ##F## does not change. It leaves (B) and (C) as possible options so why is (C)...

Similar threads

Replies
4
Views
2K
Replies
1
Views
2K
Replies
3
Views
2K
  • · Replies 2 ·
Replies
2
Views
984
  • · Replies 2 ·
Replies
2
Views
4K
  • · Replies 7 ·
Replies
7
Views
2K
  • · Replies 7 ·
Replies
7
Views
2K
  • · Replies 2 ·
Replies
2
Views
1K
  • · Replies 11 ·
Replies
11
Views
1K
  • · Replies 10 ·
Replies
10
Views
2K