Finding total resistance in a series-parallel circuit

  • Topic: Engineering 
  • Thread starter jafferrox
  • Start date
  • Tags Tags
    Circuit
7 replies · 2K views · last reply
jafferrox
Messages
25
Reaction score
0
Hi

I'm having trouble working out the total resistance in the circuit i have attached an image of.

Thanks in advance :)
 
Attachments
  • Circuit schematic labelled Figure 1: Circuit for Question 1, with terminals a and b and resistors 3 Ω, 6 Ω, 12 Ω, 4 Ω (three instances), 2 Ω (two instances) arranged in a bridge-like network between a and b.
    Untitled.png
    7.1 KB · Views: 487
Everything that is connected with wires can can be joined in a single point.

Circuit schematic with terminals a and b and resistors labeled 3 Ω, 6 Ω, 12 Ω, 4 Ω (three), 2 Ω (two) and 2 Ω; green, red and blue outlines mark groups of connected nodes.


Now every resistance that's between two of these points will be parallel with any other resistance that's between the same two points. For example between green and red you have 3 resistances in parallel, which you can replace by their equivalent.
 
Attachments
  • Circuit schematic with terminals a and b and resistors labelled 3 ohm, 6 ohm, 12 ohm, 4 ohm (three), 2 ohm (two) and 2 ohm, with green, red and blue regions circled.
    circuit.png
    7.3 KB · Views: 506
can i please have the solution for this question because i have difficulty getting the answer because it's the first time I'm doing this type of problem.

Thanks in advance.
 
Hi

I'm having trouble working out the total resistance in the circuit i have attached an image of.

Thanks in advance :)
 
Attachments
  • Circuit schematic for Question 1 with terminals a and b and resistors labelled 3 ohm, 6 ohm, 12 ohm, 4 ohm (three of them), 4 ohm, 2 ohm and 2 ohm arranged in a network between the terminals.
    circuit.png
    13 KB · Views: 482
jafferrox said:
Hi

I'm having trouble working out the total resistance in the circuit i have attached an image of.

Thanks in advance :)

what do you tried/know so far?
 
jafferrox said:
can i please have the solution for this question because i have difficulty getting the answer because it's the first time I'm doing this type of problem.

Thanks in advance.

we try to avoid giving direct solutions, you don't learn anything that way ;)

redraw your circuit using willem2's suggestion.
You will see initially, you have 2 sets of parallel resistors the upper 6Ω, 12Ω and 4Ω ones
and the lower 2 lots of 4Ω ones
solve those 2 sets of parallel values

then you have a pair of 2Ω ones in series that you can get a total value for

Redraw the circuit now with those calculated totals and then do any other series or parallel calculations :)

here's a formula for calculating resistors in parallel ...

attachment.php?attachmentid=56861&stc=1&d=1363657992.gif


have some attempts to work it out, show us your working and us guys will guide you through the process :)

Dave
 
Attachments
  • resistrs.gif
    resistrs.gif
    1.1 KB · Views: 1,438
Last edited: