Harnessing the power of lightning

  • Thread starter Thread starter Navdeep201
  • Start date Start date
  • Tags Tags
    Lightning Power
AI Thread Summary
The discussion focuses on methods to harness lightning power for knowledge rather than global energy needs. Key ideas include creating a conductive channel through plasma channels or ion beams, although challenges exist with power requirements and air dielectric breakdown. The conversation highlights the need for technology capable of handling high currents and questions the feasibility of maintaining a constant discharge channel for consistent energy supply. Additionally, the importance of directing lightning strikes to usable locations is emphasized, with suggestions for building facilities in storm-prone areas. The mention of Charles Steinmetz underscores the historical context of lightning experiments in electrical engineering.
Navdeep201
Messages
3
Reaction score
0
I was thinking to create a feasible method to effectively harness power of lightning. Even though lightning does not have enough power to meet global energy requirement, i was intending to do it for knowledge's sake.

I realized, in order to tap into the vast electric charges of clouds, it was necessary to create a conductive channel so that the charges get a conductive path.

i found it was possible by

1)by creating a plasma channel by a laser, but it would have to be cw(continuous wave) laser so that the channel can be maintained. But I believe that is impossible since the power requirements of the said laser would be humongous.

2)by dielectric breakdown of air, which is not possible for lightning harnessing purposes

3) By creating a beam of positively charged ions and artificially creating positive streamer.

this channel can be electrically connected with a Single ended primary inductor converter which in turn can be used to charge capacitors. These capacitors can be of a high discharging time and less charging time. these capacitors can then directly be used to power equipment or convert dc into ac at required frequencies using power inverter.

now my questions are
1) does sepics of such rating exist which can handle 30 kA ?
2) is there a wavelength at which air ionization occurs at very low energy ?
3) how far can a positively charged ion beam go before getting neutralized ?
 
Engineering news on Phys.org
Or you could induce a lightning strike the same way everyone else does it. Fire a small rocket into a thunderhead, trailing a very thin wire. I think the bigger problem would be figuring out how to do something useful with a huge amount of power delivered over a very short time duration.
 
there exist a constant potential difference between upper atmosphere and Earth surface, lightning occurs when dielectric breakdown of air occurs. I intend to harness the potential of the atmosphere itself. Firing a rocket and having a sudden discharge does not satisfy what I'm intending to do. I intend to create a constant channel through which discharging should occur continuously. This would take out the variation in intensity of each strike and thus a small variation in supply would be faced by equipment.
 
I don't think the issue here is to induce a strike, but rather how to direct it to a location where it can be stepped down to a usable voltage. As far as finding a lightning bolt goes, just build this hypothetical power station in a frequently stormy place.
 
there exista a book "Mpdern Jupiter" about Charles Steinmetz, who in addition to being a genius equal to Tesla ran experiments with lightning.

He seems to have been written out of US textbooks after WW2, i suppose because of his socialist leanings.



http://www.alibris.com/booksearch.detail?invid=10815432021&noworks=1&qtit=Charles+Proteus+Steinmetz&browse=1&qsort=&page=1

anyhow, every aspiring EE should be aware of him.

old jkim
 
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
Thread 'Electromagnet magnetic field issue'
Hi Guys We are a bunch a mechanical engineers trying to build a simple electromagnet. Our design is based on a very similar magnet. However, our version is about 10 times less magnetic and we are wondering why. Our coil has exactly same length, same number of layers and turns. What is possibly wrong? PIN and bracket are made of iron and are in electrical contact, exactly like the reference design. Any help will be appreciated. Thanks. edit: even same wire diameter and coil was wounded by a...
Thread 'Beauty of old electrical and measuring things, etc.'
Even as a kid, I saw beauty in old devices. That made me want to understand how they worked. I had lots of old things that I keep and now reviving. Old things need to work to see the beauty. Here's what I've done so far. Two views of the gadgets shelves and my small work space: Here's a close up look at the meters, gauges and other measuring things: This is what I think of as surface-mount electrical components and wiring. The components are very old and shows how...
Back
Top