Help momentum, recoil speed [simple]

  • Thread starter Thread starter davedays
  • Start date Start date
  • Tags Tags
    Momentum Speed
AI Thread Summary
The discussion focuses on calculating the recoil speed of a rifle when a bullet is fired. The bullet's mass is 9.0 g (0.009 kg) and it exits the barrel at a speed of 800 m/s. Using the conservation of momentum, participants confirm that the recoil speed can be calculated with the equation m1 x v1 = m2 x v2. After correcting the mass units, the final recoil speed is determined to be 40 m/s in the opposite direction of the bullet. Participants emphasize the importance of using kilograms for mass in calculations.
davedays
Messages
15
Reaction score
0

Homework Statement


A bullet m= 9.0 g leaves the barrel of a rifle with a speed = 8.0 x 10 ^2 ms-1 (by the may I am sure - is this 80 ms-1 ?)

The mass of the rifle = 1.8 kg
The rifle is free to move back
Calculate the speed of recoil

Homework Equations


I figured I would need these :
p=mv
F=mv/t

I'm not sure wether that's all I need.

The Attempt at a Solution

Well, first of all I think that the momentum 1 way = the momentum the other way.
so

p1=p2

m1 x v1 = m2 x v2

9 [g] x 80 [ms-1] = 1800 g (1.8 kg right ?) x V2

720 = 1800 V2

V2= 720/1800

V2= 0.4

Is this correct guys ?
 
Physics news on Phys.org
the way you solve the problem is correct however i think you have a mistake about the speed of the bullet. 8.0x10^2 means the bullet moves with a velocity of 800 m/s.

according to my calculations the answer is 40 m/s...
 
hmm not sure about that .. maybe I have another mistake

m1 x v1 = m2 x v2

9 x 800 = 1800 x v2

7200 = 1800 v2

v2 = 7200 / 1800
v2 = 4

isnt it 4 ms -1 ?
 
yes the method you have used is correct however as cryphonus said, the velocity is 800 m/s. also grams is not the si unit for mass, kilograms is. so you want to use 0.009kg and 1.8kg as the masses.

i got an answer of 4 m/s
 
thanks a lot guys
 
Ok; here is how i solved it; initial momentum is
800 m/s.0.09 kg (mass of the bullet in kilogram);

which is 72 m.kg/s

so if the initial momentum is 72 m.kg/s the final value should be equal to 72 also;

P(final)=1,8kg (mass of the rifle).V(recoilspeed)

72=1,8.V

V=40 m/s ,
it is in the opposite direction of the bullet so if you express the speed of the bullet as a positive value, you have to express the recoil speed as negative

any corrections are welcome...
 
9 g =0.009kg not 0.09kg
 

Similar threads

Back
Top