Help with Older Electronic Inspection System - Cognex DVT 630 Camera

  • Thread starter Thread starter salesmch
  • Start date Start date
  • Tags Tags
    Electronics
Join the discussion
Registration is free. Ask a follow-up in this thread, or start your own.
Sign up Log in
1 reply · 3K views
salesmch
Messages
1
Reaction score
0
Hi all:

I am trying to experiment with an older (10 plus year old) electronic inspection system to learn how electronic inspection works. The camera I bought is an old Cognex DVT model 630 that requires a 24 volt source. I have been able to get one of our people to rig me up a system with a plus and minus leads.

The issue is the camera has the following pins per their manual:

Pins 1-12: Inputs & Outputs
Pins 13: Ground
Pin 14 &15: + 24V

My questions:
1) How can pin 14 and 15 both be for the positive lead? Is it common that either of the two (14 or 15) pins could be connected to the positive lead?

2) Is pin 13 ground the same as the negative lead?

Many thanks!
 

Discussion

Engineering news on Phys.org
Welcome to Physics Forums!

1) Yes, +24 volts should be connected to both pins 14 & 15. It is fairly common to bring power in on two pins, often because it is simply easier to distribute it that way.

2) Yes, the negative lead of your 24 volt supply gets connected to pin 13.

Suggestion: measure your power suppyl before energising it. Since it is homemade it should be within the power limits listed in the manual.
 
Last edited: