Homework SolutionAngular Acceleration of a Fan

Click For Summary

Homework Help Overview

The discussion revolves around the angular acceleration of a fan as it decelerates from a higher angular velocity to a lower one over a specified time interval. Participants are exploring the calculations related to angular acceleration and the total number of revolutions made during this time frame.

Discussion Character

  • Mixed

Approaches and Questions Raised

  • Participants discuss the calculation of angular acceleration and the total number of revolutions, with one participant noting their computed value for angular acceleration. Questions arise regarding the correct application of formulas to find distance in terms of revolutions, and there is confusion about the initial conditions needed for the calculations.

Discussion Status

The discussion is active, with participants providing feedback on each other's reasoning and questioning the assumptions made in their calculations. Some guidance has been offered regarding the initial conditions for the calculations, but there is still uncertainty about the correct formulas to use.

Contextual Notes

Participants mention that certain concepts, such as initial position, have not been covered yet, which may affect their ability to solve the problem fully. There is an assumption that the initial position can be considered zero for the purpose of this problem.

valeriex0x
Messages
43
Reaction score
0
angular acceleration of a fan!

Homework Statement



An electric fan is turned off, and its angular velocity decreases uniformly from 500 rev/min to 200 rm rev/min in 4.00 s.
Find the angular acceleration in rev/s and the number of revolutions made by the motor in the 4.00 interval.

Homework Equations





The Attempt at a Solution





I got -1.25 for alpha in rev/sec^2, which is correct.

How come the number of revolutions isn't 5 revolutions?
(alpha) (time)=
(-1.25)(4 sec)=5 rev (-5) rev
 
Physics news on Phys.org


Acceleration x time = velocity, not distance!
 


ohhhhhhhhhhh... ok thanks. hmmm... I'm not sure what formula i should use. i was going to try x=xo+volt+1/2at^2 but i can;t. .....
 


valeriex0x said:
ohhhhhhhhhhh... ok thanks. hmmm... I'm not sure what formula i should use. i was going to try x=xo+volt+1/2at^2 but i can;t. .....

Why not? (assuming of course that you'd use the angular form of the equation)
 


i don't have xo right?
we didn't cover this yet...
 


valeriex0x said:
i don't have xo right?
we didn't cover this yet...

Assume xo is zero. The count of revolutions (distance) begins, and the clock starts ticking, at the instant the fan is turned off.
 


okay so :

0+(-1.25 rev/s^2)(4 sec)+ 1/2(-1.25 rev/s^2)(4^2)
x=-5.00+ -12.50
x=-17.50

how do i make this angular?
 


valeriex0x said:
okay so :

0+(-1.25 rev/s^2)(4 sec)+ 1/2(-1.25 rev/s^2)(4^2)
x=-5.00+ -12.50
x=-17.50

how do i make this angular?

You're using angular values, so it's angular.

But you've got a problem. You're using an acceleration where the initial angular velocity is required.
 

Similar threads

  • · Replies 1 ·
Replies
1
Views
4K
Replies
10
Views
2K
  • · Replies 4 ·
Replies
4
Views
2K
Replies
5
Views
3K
  • · Replies 2 ·
Replies
2
Views
3K
  • · Replies 3 ·
Replies
3
Views
3K
  • · Replies 5 ·
Replies
5
Views
3K
  • · Replies 2 ·
Replies
2
Views
2K
  • · Replies 2 ·
Replies
2
Views
2K
  • · Replies 2 ·
Replies
2
Views
2K