How Does Air Pressure Behave in Vibrating Wind Instruments?

Click For Summary
SUMMARY

In vibrating wind instruments, a tube open at both ends maintains atmospheric pressure at both ends while exhibiting maximum pressure oscillations at the midpoint, known as a pressure antinode. The fundamental frequency corresponds to a wavelength twice the tube length, while the second overtone has three antinodes located at 1/6, 1/2, and 5/6 of the tube length. When one end of the tube is blocked, the fundamental frequency changes to a wavelength four times the tube length, with the closed end becoming a pressure antinode. Understanding these principles clarifies the behavior of air pressure in wind instruments.

PREREQUISITES
  • Understanding of wave mechanics
  • Familiarity with acoustic principles
  • Knowledge of pressure nodes and antinodes
  • Basic concepts of sound frequency and wavelength
NEXT STEPS
  • Study the relationship between wavelength and frequency in acoustics
  • Learn about pressure nodes and antinodes in different types of tubes
  • Explore the effects of blocking ends on sound production in wind instruments
  • Investigate the differences between open and closed tube harmonics
USEFUL FOR

Musicians, acoustics engineers, educators in physics, and anyone interested in the mechanics of wind instruments will benefit from this discussion.

TheLil'Turkey
Messages
66
Reaction score
0
In a tube (open at both ends) that's vibrating at its fundamental frequency, is the air pressure the ambient air pressure at both ends and higher in the middle, lower in the middle, or can it be either higher or lower in the middle? Why?

If the same tube is vibrating at the frequency of its second overtone (1/3 the wavelength of the fundamental frequency), can the pressure be the ambient pressure at one end and either higher or lower at the other end? If you blow on one end, does that end become the one with the regular pressure or the higher/lower one?

If one end of the tube is blocked, does its fundamental frequency then become half of what it was before?

String instruments seem so much easier to understand than wind ones.
 
Physics news on Phys.org
TheLil'Turkey said:
In a tube (open at both ends) that's vibrating at its fundamental frequency, is the air pressure the ambient air pressure at both ends and higher in the middle, lower in the middle, or can it be either higher or lower in the middle? Why?

If the same tube is vibrating at the frequency of its second overtone (1/3 the wavelength of the fundamental frequency), can the pressure be the ambient pressure at one end and either higher or lower at the other end? If you blow on one end, does that end become the one with the regular pressure or the higher/lower one?

If one end of the tube is blocked, does its fundamental frequency then become half of what it was before?

String instruments seem so much easier to understand than wind ones.

For a tube open at both ends, the pressure is equal to atmospheric at both ends. It oscillates inside the tube when excited at the appropriate frequency. The lowest mode will see the maximum pressure oscillations at mid-length (this is called a pressure antinode). So the lowest-mode (fundamental) wavelength is twice the tube length. The next higher mode with have two antinodes, at the 1/4 and 3/4 length points, and will have a wavelength equal to the tube length. The pitch will be an octave higher than the fundamental. The third mode (second overtone) will have three antinodes, at the 1/6, 1/2, and 5/6 length points. The open ends are still pressure nodes (equal to atmospheric).

If you block one end of the tube, that end becomes a pressure antinode. So the wavelength of the fundamental will be 4 times the length of the tube, the next mode will have two pressure antinodes, at the 1/3 point and the closed end (assuming the closed end is at 1), the next mode will have three pressure antinodes, at the 1/5, 3/5, and closed end (again closed=1).

BBB
 
bbbeard said:
For a tube open at both ends, the pressure is equal to atmospheric at both ends. It oscillates inside the tube when excited at the appropriate frequency. The lowest mode will see the maximum pressure oscillations at mid-length (this is called a pressure antinode). So the lowest-mode (fundamental) wavelength is twice the tube length. The next higher mode with have two antinodes, at the 1/4 and 3/4 length points, and will have a wavelength equal to the tube length. The pitch will be an octave higher than the fundamental. The third mode (second overtone) will have three antinodes, at the 1/6, 1/2, and 5/6 length points. The open ends are still pressure nodes (equal to atmospheric).

If you block one end of the tube, that end becomes a pressure antinode. So the wavelength of the fundamental will be 4 times the length of the tube, the next mode will have two pressure antinodes, at the 1/3 point and the closed end (assuming the closed end is at 1), the next mode will have three pressure antinodes, at the 1/5, 3/5, and closed end (again closed=1).

BBB
Wow. I was very confused before, but this cleared a lot of things up. I think you made one mistake though; the bolded 1/3 point should be 1/2, right?
 
TheLil'Turkey said:
Wow. I was very confused before, but this cleared a lot of things up. I think you made one mistake though; the bolded 1/3 point should be 1/2, right?

No, it's 1/3. See attached.
 

Attachments

  • pressureantinodes.jpg
    pressureantinodes.jpg
    18.3 KB · Views: 465
That makes sense. Thank you!
 

Similar threads

  • · Replies 6 ·
Replies
6
Views
4K
  • · Replies 24 ·
Replies
24
Views
10K
  • · Replies 2 ·
Replies
2
Views
4K
  • · Replies 18 ·
Replies
18
Views
4K
  • · Replies 8 ·
Replies
8
Views
5K
  • · Replies 16 ·
Replies
16
Views
3K
  • · Replies 12 ·
Replies
12
Views
4K
  • · Replies 5 ·
Replies
5
Views
3K
  • · Replies 5 ·
Replies
5
Views
4K
  • · Replies 29 ·
Replies
29
Views
4K