How Does Resistor Position Affect Transistor Storage Time?

Click For Summary
The discussion centers on how the position of a resistor affects the storage time of a transistor, particularly in a common emitter configuration. The storage time, defined as the time required for minority carrier concentration to drop to zero, can be influenced by changes in base current resulting from resistor placement. When the resistor was moved to ground, it likely reduced the base current, leading to an increase in storage time. Participants seek clarification on the relationship between resistor positioning and transistor behavior, emphasizing the importance of circuit configuration. Understanding these dynamics is crucial for optimizing transistor performance in electronic applications.
Monsu
Messages
38
Reaction score
1
hi,
could anyone pls tell me why the storage time of a transistor changes as u change the position of one resistor?
During an experiment, when the resistor connected to the base voltage was reconnected to the ground i noticed that the storage time increased. pls someone explain to me why.
thanks!

(i'd appreciate multiple answers, so pls if smne has answered, pls feel free to drop your own answers too.)

Monsu









I'm not sure what you mean by "storage time," as this is not a parameter I've ever heard of. Can you please try describing your question in more standard terminology?

- Warren

the storage time is the time needed for minority carrier concentration in the vincinity of pn junction to be reduced to zero
 
Last edited:
Physics news on Phys.org
Transistors are current controlled devices. By placing a resistor to ground you may have reduced the current at the transistor base. I can't say this for sure because I don't know your original configuration. Did you monitor or calculate the base current during your experiment?
 
all I did was measure the storage time, delay time, rise time and fall time. I didn't do anything with the current.
pls help!
totally confused!
Monsurat.
 
You said you moved a resistor. By moving a resistor you most likely altered the current to the transistor base. How was your transistor circuit originally configured-- common base, commone emitter or common collector? Do you have a drawing of the original circuit and the altered circuit?
 
it was a common emitter configuration.
here 's a diagram.
 

Attachments

  • transistor set up.JPG
    transistor set up.JPG
    8.2 KB · Views: 659

Thread 'Magnitude of buoyant force in fluids of different densities'

The book claims the answer is that all the magnitudes are the same because "the gravitational force on the penguin is the same". I'm having trouble understanding this. I thought the buoyant force was equal to the weight of the fluid displaced. Weight depends on mass which depends on density. Therefore, due to the differing densities the buoyant force will be different in each case? Is this incorrect?
View full post »

Similar threads

Storage time of a transistor changes
  • · Replies 2 ·
Replies
2
Views
2K
Confirmation of T/F questions concerning Diodes-Transistors
  • · Replies 4 ·
Replies
4
Views
2K
How Does Magnet Position Affect EMF in a Coiled Wire System?
  • · Replies 35 ·
2
Replies
35
Views
4K
How Does Adding Resistors Affect Bulb Brightness in a Series Circuit?
  • · Replies 7 ·
Replies
7
Views
4K
Why Can't the Voltage at a PN Junction be Measured from the Outside?
  • · Replies 1 ·
Replies
1
Views
3K
How does a high pass filter work?
  • · Replies 10 ·
Replies
10
Views
4K
Undergrad How Does Changing Mass and Spring Force Affect Watch Oscillators?
  • · Replies 11 ·
Replies
11
Views
2K
How Do Displacement-Time, Velocity-Time, and Acceleration-Time Graphs Relate?
  • · Replies 3 ·
Replies
3
Views
2K
High School How do physicists know that the past is immutable?
  • · Replies 4 ·
Replies
4
Views
2K
How Does a Sprinter's Acceleration Affect Race Time?
  • · Replies 1 ·
Replies
1
Views
5K