How to find the maximum bending moment in this beam problem

4 replies · 4K views · last reply
foo9008
Messages
676
Reaction score
4

Homework Statement


how the author found the maximum moment = 0.29MNm ? is there any formula ? how to find it in this question ?
Printed textbook problem and worked solution: timber beam 8 m long carrying a 200 mm brick wall 5 m high, with total wall weight W = 8 x 0.2 x 5 x 1850 x 9.81 = 0.145 kN, maximum bending moment Mmax = 0.29 MNm, and the relation M = sigma I / y.

Handwritten working on a beam bending problem: depth b and width 2b, centroid at mid-depth, Mmax = 0.29 = 7.5 x b(2b)^3/12 / b, giving depth b = 0.39 m and width 2b = 0.77 m.

Homework Equations

The Attempt at a Solution

 
foo9008 said:

Homework Statement


how the author found the maximum moment = 0.29MNm ? is there any formula ? how to find it in this question ?
Handwritten-style typed solution to a timber beam problem: total wall weight W = span x thickness x height x density, then W = 8 x 0.2 x 5 x 1850 x 9.81 = 0.145 kN, then maximum bending moment Mmax = 0.29 MNm, and the relation M = sigma I / y.

Handwritten working on a beam problem: depth b and width 2b, centroid at mid depth, Mmax = 0.29 = 7.5 x b(2b)^3/12 over b, giving depth b = 0.39 m and width 2b = 0.77 m.

Homework Equations

The Attempt at a Solution

Of course there's a formula. That's what beam tables are for - too look up things like the maximum B.M. without having to work them out from scratch all the time.

Here is a set of typical beam tables:

http://www.awc.org/pdf/codes-standards/publications/design-aids/AWC-DA6-BeamFormulas-0710.pdf

Your beam is Figure 1, page 4.

BTW, the calculation of the total weight of the wall above has a small error. W = 0.145 MN, rather than 0.145 kN.
 
SteamKing said:
Of course there's a formula. That's what beam tables are for - too look up things like the maximum B.M. without having to work them out from scratch all the time.

Here is a set of typical beam tables:

http://www.awc.org/pdf/codes-standards/publications/design-aids/AWC-DA6-BeamFormulas-0710.pdf

Your beam is Figure 1, page 4.

BTW, the calculation of the total weight of the wall above has a small error. W = 0.145 MN, rather than 0.145 kN.
the shape is rectangular cross section , am i right ? why the moment shouldnt' be a(b^3) / 12 ? but , a(b^2) / 8 ?
 
foo9008 said:
the shape is rectangular cross section , am i right ? why the moment shouldnt' be a(b^3) / 12 ? but , a(b^2) / 8 ?
The problem is trying to figure out the dimensions of the cross section of the beam so that max. bending stress is limited to 7.5 MPa.

Remember, in bending, σ = M ⋅ y / I

It is postulated that the beam supporting the brick wall is twice as deep as it is wide, or w = b and d = 2 ⋅ b, and I = w ⋅ d3 / 12 and y = d/2