I got a general question(not a math problem)

  • Thread starter Thread starter xlaserx7
  • Start date Start date
  • Tags Tags
    General
AI Thread Summary
The discussion centers on the relationship between force magnitudes and lever arm distances in the context of torque. Torque is defined as the product of force and lever arm length, indicating a direct relationship between the two. However, the effectiveness of the force depends on its application angle, particularly the need for it to be perpendicular to the lever arm for maximum torque. Participants clarify that any force can be applied regardless of size, but its impact on torque varies based on the lever arm's length and angle. Understanding these principles is essential for solving related physics problems effectively.
xlaserx7
Messages
13
Reaction score
0
1. Homework Statement
what is the relationship between the magnitudes of the forces exerted and the lever arm distance over which the force were exerted?

2. Homework Equations
3. The Attempt at a Solution
the force and distance are directly related because T (torque) = F times (lever arm)
 
Last edited:
Physics news on Phys.org
There is no relationship.
 
what?? why1? is it because the force has to be perpendicular to the center of rotation?
 
No.
It is because if you have a lever of a certain length, you can apply whatever force upon it. A tiny force or a huge force, your choice.
 
ahhh ok thanks
 
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Trying to understand the logic behind adding vectors with an angle between them'

Thread 'Trying to understand the logic behind adding vectors with an angle between them'

My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
View full post »

Similar threads

Why does the war-wolf reach its maximum speed at the vertical position?
Replies
19
Views
2K
Question about Normal Force and Torque
Replies
5
Views
3K
Finding the mass of a ball and a rod using torque
Replies
8
Views
2K
Direction of a spring's force in more than one dimension
Replies
6
Views
2K
Rotational Motion and Torque problem
Replies
12
Views
3K
Torque On a Clock Hanging from a Nail
Replies
4
Views
3K
What is the force exerted by each hinge on the door?
Replies
3
Views
13K
How does a rod rotate due to gravity?
Replies
6
Views
2K
Someone verify my answer to this question about rotation?
Replies
9
Views
1K
Automotive Steering Force, Determining the Lever Arm
Replies
9
Views
1K

Hot Threads

Recent Insights

Back
Top