Individual project on Energy harvesting using piezoelectric material

AI Thread Summary
Cutting piezoelectric materials like PZT-5H is challenging due to their ceramic nature, which can blunt scissors and complicate laser cutting. An abrasive waterjet is recommended as an effective method for cutting this type of material without damaging it. For attaching the PZT-5H to a beam in a way that allows for easy detachment, alternatives to epoxy glue should be considered, though specific methods were not detailed in the discussion. The conversation also referenced a paper on micromachining processes for bulk PZT, suggesting further reading for those interested in advanced techniques. Overall, careful consideration of cutting and attachment methods is essential for successful energy harvesting projects.
Kajan thana
Messages
149
Reaction score
18
TL;DR Summary
I am required to fabricate a cantilever with piezoelectric material attached to the surface in order to harvest energy - bimorph and unimorph. The piezoelectric material I will be using is PZT - 5H.
I have two questions:
1) Is it possible to cut the material with a laser cutter or scissors or do I need to have a specific tool?
2) What is the best way to attach the PZT-5H material to the beam but it can be easily detached for using it on another beam ( so no epoxy glue)?Thank you
 
Last edited by a moderator:
Engineering news on Phys.org
Thank you for the suggestion
 

Thread 'Bubble formation in 4 mm gap vessel'

How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Find 3D Printer & Software Resources for Prototype Creation'

I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...
View full post »

Similar threads

Can a piezoelectric create dynamic pressure in oil fluid for energy harvesting?
Replies
3
Views
2K
Piezoelectric energy harvesting systems
Replies
1
Views
2K
Damping effect in piezoelectric energy harvesting systems
Replies
5
Views
2K
Can Sound Energy be Harvested and Stored using Piezoelectric Materials?
Replies
11
Views
4K
Need Help Finding Cheap Vibration Testing Equipment
Replies
6
Views
2K
Impact Energy Absorbed by a Material
Replies
4
Views
3K
Re: Piezoelectric dimensions problem in energy harvesting
Replies
1
Views
3K
Types of Piezoelectric Crystals to Harvest Sound
Replies
2
Views
4K
Harvesting the energy of sea waves using capacitance
Replies
39
Views
3K
Making Energy Generating Gym Equipment
Replies
5
Views
3K

Hot Threads

Recent Insights

Back
Top