Need to find the distance but how?

  • Thread starter Thread starter windrar
  • Start date Start date
AI Thread Summary
To determine how far in advance a runner should release a water cup before reaching a garbage pail, the vertical distance of 0.50 meters must be considered. The cup is released and falls freely, allowing the use of the free fall equation to calculate the time it takes to fall this distance. Once the time is established, the distance the runner covers while the cup falls can be calculated using the runner's speed of 6.20 m/s. By applying the speed equation, the required distance can be found easily. This method provides a clear solution to the problem.
windrar
Messages
5
Reaction score
0
Participants in a road race take water from
a refreshment station and throw their
empty cups away farther down the course.
If a runner has a forward speed of 6.20 m/s,
how far in advance of a garbage pail
should he release his water cup if the
vertical distance between the lid of the
garbage can and the runner’s point of
release is 0.50 m?

I am still in grade 11 so please make it simple for me. Thank you very much.
 
Physics news on Phys.org
well, I suppose the pictorial representation of the graph should be something like this. The green dots are the projection of the cup after it is released by the runner and x is that distance we want to find.

And I think the runner does not actually throw the cup, but just releases it and let it fall freely. Because if the runner does throw it, the question would have stated the speed of the throw.

Anyway, first thing is to consider how long it will take for the cup to reach the height of the lid of the garbage from the time when the runner releases the cup. To do this, we look at the equation of the free fall:

s = 1/2 g t2

where:
g is the gravitational acceleration,
s is the distance of the fall,
and t is the time taken to fall that distance

We already know s and g, so solving for t should be simple. In our case, s will be the 0.5 meters distance between the hand of the runner and the lid of the garbage. In my picture, it is the line colored in red.

Now that we have got the time taken to complete the 0.5 meters distance, we can now calculate how far from the garbage pail the runner should release the cup. So now the problem is quite simple.

Just look at it this way: the runner is running at the speed of 6.20 m/s and he needs to cover the distance x within the time t. For this, the only equation you need to use is the equation of speed :

x = v x t

So, since time t is already known from our previous calculation so solving for this will be very simple.

Hope this helps
 

Attachments

  • runner.JPG
    runner.JPG
    3.9 KB · Views: 763
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top