Radioactivity of Thorium question

  • Thread starter Thread starter bigkrezca32
  • Start date Start date
  • Tags Tags
    Radioactivity
AI Thread Summary
The discussion revolves around calculating the decay constant and energy release from thorium's alpha decay. The decay constant was correctly determined to be 4.14 x 10^-5 hrs^-1. The problem involves calculating the change in temperature of water heated by the decay energy of thorium, requiring multi-step calculations including the mass difference between reactants and products. The final temperature change was found to be approximately 60.11 K, with clarification that the temperature difference does not require subtracting 273, as it cancels out in the calculation. The discussion highlights the importance of understanding mass-energy equivalence and heat transfer principles in solving the problem.
bigkrezca32
Messages
3
Reaction score
0

Homework Statement


Thorium (with half-life T1/2 = 1.913 yr. and atomic mass 228.028715 u) undergoes alpha decay and produces radium (atomic mass 224.020186 u) as a daughter nucleus. (Assume the alpha particle has atomic mass 4.002603 u.)

(a) What is the decay constant of thorium? (Note that the answer must be in units of hrs-1.)
-- I got this correct (4.14 * 10^-5)

(c) The energy released from the decay of 10 g of thorium is used to heat 3.8 kg of water (assume all the energy released goes into the water).
What is the change in temperature of the water after 1 hr.?
--------HELP: This is a multi-step problem. Among the things you must do are: i) determine the heat given off by the decay of one thorium atom, ii) determine the number of thorium atoms that decay to get the total heat given off, iii) determine the temperature change of the water knowing how much heat is given off.

HELP: To determine the heat given off, figure out the difference in mass of the reactants and products and use E = mc2. Be careful of your units.

HELP: To determine the amount of thorium that decays, figure out how many thorium atoms there were initially and then determine how many there are after 1 hrs. As always, watch your units.

HELP: Once you know the heat released, use the heat capacity of water (4186 J/kg-K) and the mass of water to find the temperature change.

Homework Equations


N = NOe^-λt
C= mcT
E= mc2



The Attempt at a Solution



- 10g(1/228.028715)(6.022 * 10^23) = 2.64 * 10^22 atoms

- N = NOe^-λt = (2.64*10^22)e^-(4.14 * 10^-5)(1) = 2.63989 * 10^22 atoms

-- From this point I'm having problems figuring out the difference in mass between initial and final I think. Should the initial mass be: (2.64 * 10^22)(1 mo/ (6.022 * 10^23)(228.028715 g/ 1 mol) ...?

What should the final mass be?

I know from that point you plug in the change in mass into E = mc2, and take that energy and put it in for Q in Q=mcT (with the mass here being the mass of the water), and solve for T. The T I get here - 273 would be the degrees in celsius. Help!
 
Physics news on Phys.org
For one decay the difference in mass=mass of Th-(mass of Ra +mass of alpha)
 
Ok. I ended up getting the right answer but don't fully understand the last step.

mf= .005926u
E=mc^2 = 8.9 * 10^-13 J

For difference in # of atoms I did: Atoms initial = (10 g * 1 mol /232.038 g * 6.022 * 10^23) = 2.59526457 *10^22
Atoms final= N = 2.59526457 * 10^22e^(-4.14 * 10^-5) = 2.59515713 * 10^22
Atoms initial - Atoms final = 1.0744 * 10^18 atoms

(Eatom)(difference in atoms) = (8.9 * 10^-13)(1.0744 * 10^18) = 956216 J

Q= mcT
956216 = (3.8)(4186)T
T= 60.11

---- Why is it that I don't have to subtract 273 from this answer? Did I get my Q wrong, and got lucky with my answer? Since 4186 is in units J/Kg-K, it seems that the answer I'd get would be in K (hence subtract 273). Thanks for the help.
 
bigkrezca32 said:
Q= mcT
956216 = (3.8)(4186)T
T= 60.11

---- Why is it that I don't have to subtract 273 from this answer? Did I get my Q wrong, and got lucky with my answer? Since 4186 is in units J/Kg-K, it seems that the answer I'd get would be in K (hence subtract 273). Thanks for the help.

Your expression is more correctly Q = mcΔT. You are calculating a temperature difference which makes the 273 drop out because it is added and subtracted.
 
Thanks a lot for the help. It makes a lot more sense now.
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
I was thinking using 2 purple mattress samples, and taping them together, I do want other ideas though, the main guidelines are; Must have a volume LESS than 1600 cubic centimeters, and CAN'T exceed 25 cm in ANY direction. Must be LESS than 1 kg. NO parachutes. NO glue or Tape can touch the egg. MUST be able to take egg out in less than 1 minute. Grade A large eggs will be used.
Back
Top