Revolutionizing Nanotube Production

  • Thread starter Thread starter sid_galt
  • Start date Start date
  • Tags Tags
    Revolution
Click For Summary
SUMMARY

The forum discussion centers on advancements in carbon nanotube (CNT) production, specifically a method capable of producing a 10-meter by 5-centimeter ribbon at a thickness of 50 nanometers per minute. Participants highlight the potential applications of CNTs, including their use in electronics and as composite materials due to their strength and conductivity. The discussion also references the book "Applied Physics of Carbon Nanotubes" by Slava Rotkin and Shekhar Subramoney as a valuable resource, while emphasizing the need for scalable production methods for aligned multi-walled carbon nanotubes (MWCNT). Additionally, the University of Texas at Dallas is noted for its research on hydrogen storage using CNTs.

PREREQUISITES
  • Understanding of carbon nanotube (CNT) properties and applications
  • Familiarity with composite materials and their manufacturing processes
  • Knowledge of electronic and thermal properties of materials
  • Awareness of current research trends in nanotechnology
NEXT STEPS
  • Research scalable production methods for aligned multi-walled carbon nanotubes (MWCNT)
  • Explore the book "Applied Physics of Carbon Nanotubes" by Slava Rotkin and Shekhar Subramoney
  • Investigate hydrogen storage solutions using carbon nanotubes
  • Review resources on nanotechnology at the University of Texas at Dallas
USEFUL FOR

Researchers, materials scientists, and engineers interested in nanotechnology applications, particularly in the fields of electronics, composite materials, and energy storage solutions.

sid_galt
Messages
502
Reaction score
1
Last edited by a moderator:
Engineering news on Phys.org
Yeah I read the article today. Pretty damn amazing. Appl. phys. lett. had news on some dude that built a diode out of a nanotube. The news is at physicsweb and you can find the actual articles id there.
 
That is very cool.
 
That is more then cool, I wonder which companies will get the most use of it? I've been waiting a long time for a roll up TV.
 
Is the space elevator now within the realms of possibility?
 
The space elevator has a lot more going against it than just nanotubes required.
 
I've yet to catch the article itself, any information about actual properties the ribbon has ?
 
IIRC: Good conductor, as strong as (or stronger) that stainless steel, light.
 
Thanks, comparability to stainless steel mechanical wise gives it the placing was after.
 
  • #10
Does anyone or here work with nanotubes / in nanotech?

I am very interested in this technology and would appreciate any recommendations if there are any good books on this yet.
 
  • #11
In nanotech, there are actually quite a number of book already available. I've been meaning to get this new one : Applied Physics of Carbon Nanotubes : Fundamentals of Theory, Optics and Transport Devices by Slava Rotkin, Shekhar Subramoney ... anyone out there got a handle on whether this is good, would be newest?

As a general book I've used Carbon Nanotubes and Related Structures by Peter Harris, don't really now how it compares with the other books out there (searching amazon will probably lead to a number of alternatives) but for myself worked as a general intro (a few years older).
 
  • #12
obviously these ribbons are only relatively strong (ie. compared to steel etc) but their real world strength is q small...so how would they be used to make super-strong materials? as the fibres of a composite or what?
 
  • #13
Saoist said:
obviously these ribbons are only relatively strong (ie. compared to steel etc) but their real world strength is q small...so how would they be used to make super-strong materials? as the fibres of a composite or what?

Well being comparitively stronger than steel and kevlar isn't insignificant. The real world strength of these fabrics could be quite large, since you can easily layer them to increase total strength. They could certainly be used as fibres in a composite (which is already what tons of CNTs are used for each year, except not as a fiber), but the real value of this material is in its electronic and thermal properties. That is another place the strength is a benefit, because it allows you to generate robust production methods for electronics due to your material being able to handle the process.
 
Last edited:
  • #14
By the way I did a little research, and as far as I can tell the technology is still missing one ingredient before this process becomes commercially feasible. While tons of MWCNT are produced each year, Zhant et. al's method requires the CNTs to be in an aligned forest before their process works. It is well known how to produce nanotubes in that configuration, but these methods in publication typically create small amounts, and are not obviously scalable.

If someone knows of another method of producing MWCNT in a forest at high production rate, please let me know.
 
  • #15
Couldn't these sheets be used as a mroe efficient stroge madium for Hydrogen (for use in fuel cells)? I seem to remember hearing once that H could be stored in carbon nanotubes as a safer and easier alternative to pressurization or liquifaction.
 
  • #16
Yes, and in fact at the same university that this last advance came from they have an entire project devoted to this. See the research thrusts at the http://nanotech.utdallas.edu/nn/index.asp found at the University of Texas at Dallas.
 
Last edited by a moderator:
  • #17
And they all sound so cute too ... nanophotonics, nanoelectronics, and nanoenvironmental, Thats a good link Locrian, thanks for posting it.
 
  • #18
Thanks. Not to overstay my welcome, but if you like nanotech you might find the molecular torch useful. I just found it a couple of days ago and I thought it had a suprising amount of information. They've worked hard on it.
 
  • #19
Yes they have, also some great links there, but several of them I can't access. But the info on Nano-Dots and solar cells is great.
 
  • #20
hi please let me know the book and websites for basics in naotechnology
 
  • #21
I'm still enjoying as a sort of a basic book concerning carbon nanotubes : Harris, Peter J. F. - Carbon nanotubes and related structures : new materials for the twenty-first century / 2003 . If there is something better, recent, newer out there would be mutually interested in knowing :confused:
 
  • #22
I know this ribbon must be expensive, but does anybody know where to buy it?
 
  • #23
nanotech basics

anu bedi said:
hi please let me know the book and websites for basics in naotechnology

Go to this website

https://www.nanohub.org/resources/1021/


A Gentle Introduction to Nanotechnology and Nanoscience
Author Mark A. Ratner
 
Last edited by a moderator:
  • #24
h.g.Whiz said:
I know this ribbon must be expensive, but does anybody know where to buy it?

www.nanoindustries.com lists most (if not all) suppliers of CNTs, try to find something there.
 

Similar threads

  • · Replies 2 ·
Replies
2
Views
2K
  • · Replies 1 ·
Replies
1
Views
6K
  • · Replies 13 ·
Replies
13
Views
3K
  • · Replies 0 ·
Replies
0
Views
7K
  • · Replies 1 ·
Replies
1
Views
906
Replies
2
Views
2K
  • · Replies 12 ·
Replies
12
Views
2K
  • · Replies 25 ·
Replies
25
Views
5K
  • · Replies 1 ·
Replies
1
Views
2K
  • · Replies 5 ·
Replies
5
Views
2K