Simplest possible light sensor relative calibration

Join the discussion
Ask a follow-up here, or get your own question answered by working scientists, mathematicians and engineers — people, not an autocomplete.
Real named experts · corrections over time · the nuance an AI answer skips
Sign up Log in
7 replies · 2K views
john824
Messages
4
Reaction score
0
I am looking for way how to do relative calibration of light sensor (PMT). I would appreciate any suggestions or links to sources with description how to do it in very simple (understand also cheap if possible) way.

For example. Let say that I have integration sphere with two outpust. I have two optical cables connecting to sphere. Let's assume that those two cables are identical. Optical cable enlight PMT sensor from some distance in black box. I can measure light characterstics by PMT (not calibrated). With distribution maximum at point I_max_one_source.

If I connect two cables from integration sphere to black box, playing role of two very close sources, should I see 2 times more pulses on PMT? So will I see distribution with maximum at point

I_max_two_sources = 2 x I_max_one_source?

Any other way or suggestions how to do simple calbration are appreciated.

Thanks for answers to naive questions from beginner in the field.
 
Physics news on Phys.org
If the sources are close enough to give two times the light intensity at the position of the PMT, then you can get approximately twice the pulse rate. Not exactly due to the dead time of the PMT.
 
Thank you for answer.

If laser light (green one for example) will be used as input to integration sphere (as light source), what hapend to output (from integration sphere) light wavelength? Output wavelength(s) will be simmilar or same or different (how much?) to laser wavelength?
 
I am not sure, because that, let me ask in diffrent way - my questions then are:

Can integrating sphere change wavelength? I suppose no, but because I am beginner, I would like to ask it.
Can optical cable change wavelength?

There is nothing more, just air in black box and integrating sphere. So in simple setup without anything else I am not expecting change of wavelength. Could you confirm it?
 
(Significant) frequency shifts come from materials only - and you need special materials for that. Light passing through vacuum or air will simply keep its frequency.
The wavelength in a medium depends on the local speed of light within, but once the light leaves the material it goes back to its initial value if no frequency shift occurred.
 
Thank you.

Another question. Output from integrating sphere will be carried in-by optical fiber cable. Is there reduction of light intensity in cable? So if cable will be let say 1, 10 cm and 100 cm long should be any reduction expected?
 
john824 said:
Is there reduction of light intensity in cable?
No cable is completely loss-free. The loss (as function of the light frequency) should be given in the datasheet of the cable.