Solve Elevator Problem: Work & Power Required

  • Thread starter Thread starter tnhoots
  • Start date Start date
  • Tags Tags
    Elevator
AI Thread Summary
The discussion centers on calculating the work and power required to pull a skier up a slope using physics principles. Participants emphasize the importance of including the skier's mass in the calculations and correctly applying the work formula, which involves gravitational force and the angle of the slope. There is confusion regarding the use of trigonometric functions and the correct values for force and distance. The conversation highlights the need to convert the final power output from watts to horsepower. Overall, contributors are collaboratively troubleshooting the problem to arrive at accurate solutions.
tnhoots
Messages
36
Reaction score
0

Homework Statement



A skier of mass 69.7 kg is pulled up a slope by a motor-driven cable.
(a) How much work is required to pull him a distance of 59.8 m up a 29.9° slope (assumed frictionless) at a constant speed of 1.90 m/s?
(b) A motor of what power is required to perform this task?
hp

Homework Equations



(a) w=f*change in distance*cos angle
(b) power=work/change in time

The Attempt at a Solution



gravity is the only force in play. so the equation for work would be
w=(9.8m/s^2)(59.8m)(cos29.9)=508.03

take that value and divide it by change in time to get power

*correct?
 
Physics news on Phys.org
"cos angle" refers to what angle? With respect to your given angle cos is the wrong trig function. You are also missing a mass factor which would have been obvious if you had checked the units on your answer.
 
No. w=f.s=m.a.s
You haven't taken the mass of the skier into account. The acceleration will be along the incline (which youve taken incorrectly).
 
Power can be calculated by p=fv
 
Ok so the F in the problem is 9.8m/s^2. I would use cos0. However, the change in distance is unknown. Using the formula d=time * speed, I found it to be 8.75m. So, now would I use the work formula with the numbers (9.8m/s^2)(8.75m)(cos0). Which equals 85.57J. After I find that I would divide work by time (5secs) to find average power which is 17.15 W...just my thinking??
 
F is not 9.8 m/s^2. That is a. You are forgetting to take into account mass of the skier. force = mass * acceleration
 
Ok-so hopefully this is it:
W=(mass of skier*acceleration)(change in distance)(cos29.9)
W=(132.43)(59.8)(cos29.9)=6865.23.
Then take that value and divide by the time which is 31.55 seconds.
Which equals 217.6 hp
 
The SI unit of power is watts. There are about 746 watts per h.p. but you better look up that number, i am pulling it out of my head.
 
Is the way I worked the problem out correct? I just need to convert the 217.6 watts to hp? I have had trouble solving this problem. It would be nice to know if this thinking is correct.
 
  • #10
The reasoning seems okay to me.
 
  • #11
UGH! I'm still stuck. Any help would be greatly appreciated!
 
  • #12
Where are you stuck?
 
  • #13
alright...i think I've got it. I have to run to class, but I will post later witht the answer I finally came up with! YAY!
 
  • #14
actually, nevermind that answer was also incorrect. sorry to get our hopes up!:frown: Still working...
 
  • #15
whoops, you shouldn't be looking at the cosine of theta. Sorry, just caught that.
 
Back
Top