What do the dots and crosses represent in pole changing method diagrams?

2 replies · 2K views · last reply
ranju
Messages
221
Reaction score
3
I was going through pole changing methods , when I was studying this given figure , I am quite confused in it.. in the text a1a1' & a2a2' are considered as 2 separate coils & it is assumed that both coils are carrying clockwise current , then what that "dot" & "cross" denoting?? Is it the magnetic field according to right hand thumb rule..?? But then why in a1' & a2' the direction is outwards.. as according to right hand rule it'll be inside the plane only ..!
 
Attachments
  • Two-part textbook diagram, Fig. 9.42, showing pole changing of a winding: in (a) four coil sides are marked with dots and crosses between alternating N and S poles, labelled Consequent poles; in (b) the coil sides are regrouped so the pole pattern changes.
    IMG_20150423_092118.jpg
    36.6 KB · Views: 519
  • Printed textbook figure titled Induction Machine, parts (a) and (b), showing cross-sectional coil diagrams with dots and crosses marking current direction, labelled N and S poles, consequent poles, and current direction reversed.
    IMG_20150423_092239.jpg
    32.5 KB · Views: 481
You should read the diagrams in the context of the accompanying text. What does it say?

I think you'll find that a2 and a2' are two parts of the same loop of wire. The dot and cross indicate the direction of the current in the wire.
But I cannot see the circulation arrows properly to verify.
 
In the context it is assumed that current is circulating in clockwise direction in both the coils a1a1' & a2a2' . dot & cross can't denote current then , it must be the field.>!