Where can I find recommended books and tutorials to learn SolidWorks?

  • Thread starter Thread starter ueckerjc
  • Start date Start date
  • Tags Tags
    Solidworks
AI Thread Summary
Recommended resources for learning SolidWorks include built-in tutorials within the software, which provide practical guidance. Additionally, users suggest visiting SolidWorksModel.com for comprehensive tutorials, such as creating a chopper and utilizing Photoworks. YouTube also offers valuable video tutorials that can enhance learning. These resources cater to various learning preferences, from books to online platforms. Engaging with these materials can significantly improve SolidWorks skills.
ueckerjc
Messages
1
Reaction score
0
Can anyone recommend some good books or computer based tutorials to learn SolidWorks.
 
Engineering news on Phys.org
Last edited by a moderator:
ueckerjc said:
Can anyone recommend some good books or computer based tutorials to learn SolidWorks.


Hi, you should try the solidworks tutorials of http://www.solidworksmodel.com
It's an amazing tutorial about creating a chopper in solidworks and photoworks! I learned a lot of it!
 

Thread 'HP Required to move a robot 10meters at 1.5m/sec'

I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
View full post »

Thread 'Bubble formation in 4 mm gap vessel'

How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
View full post »
Thread 'Calculate minimum RPM to self-balance a CMG on two legs'

Thread 'Calculate minimum RPM to self-balance a CMG on two legs'

Here is a photo of a rough drawing of my apparatus that I have built many times and works. I would like to have a formula to give me the RPM necessary for the gyroscope to balance itself on the two legs (screws). I asked Claude to give me a formula and it gave me the following: Let me calculate the required RPM foreffective stabilization. I'll use the principles of gyroscopicprecession and the moment of inertia. First, let's calculate the keyparameters: 1. Moment of inertia of...
View full post »

Similar threads

In search of.... Solidworks Tutorials
Replies
1
Views
1K
What to do/how to become a pro at cad design solidworks
Replies
1
Views
2K
SolidWorks worm reducer analysis tutorial needed
Replies
2
Views
2K
Automotive Topology optimization of an engine's cylinder block
Replies
14
Views
849
Solidworks thermal simulation: is this logical?
Replies
4
Views
3K
Beginner's approach to CFD software?
Replies
8
Views
3K
Should I learn Pro/Engineer or SolidWorks?
Replies
41
Views
58K
Torque on the Drive Shaft of a Screw Conveyor
Replies
3
Views
4K
How are/were computers used in jet engine design?
Replies
20
Views
3K
What is the Proper Involute Profile for Worm Gear Drive Teeth Design?
Replies
8
Views
5K

Hot Threads

Recent Insights

Back
Top