Why Do Compact Fluorescent Lamps Striate When Connected to Dimmer Circuits?

  • Thread starter Thread starter NotoriousNick
  • Start date Start date
  • Tags Tags
    Lamp
AI Thread Summary
Compact Fluorescent Lamps (CFLs) connected to dimmer circuits often exhibit striation or flashing, which is likely due to the triac in the dimmer chopping the waveform. This striation occurs at a frequency slower than 60Hz, making it visible. Standard CFLs are not designed for use with dimmers, leading to poor performance and reduced lifespan. To avoid these issues, it is recommended to use dimmable CFLs specifically labeled for this purpose. Using the correct type of bulb will ensure better functionality and longevity.
NotoriousNick
Messages
29
Reaction score
0
We have Compact Fluorescent lamps hooked up to a dimmer circuit, and they are striating (flashing) at exactly the same frequency, even at full power setting, which tends to tell me it's circuit related.

Now I know that a dimmer circuit uses a triac to chop up the waveform, and therefore we're witnessing some by-product of this.

However, the striations seem to be a lot slower than 60Hz, otherwise I'm not sure we'd be able to see them.


Anyone know the physics of striations of Fluorescent lamps?
If and where the problem is in the circuit, ballast, or lamps?
or how to fix this?

Thanks ahead of time.
 
Engineering news on Phys.org
Can't tell you the root cause of the phenomenon, but I can tell you how to fix it: don't use a dimmer with your standard CFLs. They aren't designed for it, it doesn't work well, if at all, and it greatly shortens their lifetime (and isn't great for the dimmer, either). If you must have the ability to dim them, use dimmable CFLs--it will say so on the package.
 

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »
Thread 'Beauty of old electrical and measuring things, etc.'

Thread 'Beauty of old electrical and measuring things, etc.'

Even as a kid, I saw beauty in old devices. That made me want to understand how they worked. I had lots of old things that I keep and now reviving. Old things need to work to see the beauty. Here's what I've done so far. Two views of the gadgets shelves and my small work space: Here's a close up look at the meters, gauges and other measuring things: This is what I think of as surface-mount electrical components and wiring. The components are very old and shows how...
View full post »

Hot Threads

Recent Insights

Back
Top