What are the cooling requirements for a gas core reactor?

  • Thread starter Thread starter aquitaine
  • Start date Start date
  • Tags Tags
    Cooling Core Gas
AI Thread Summary
Gas core reactors would still require significant heat dissipation to prevent structural failure, similar to traditional solid core reactors. Despite operating at higher temperatures, the heat removal rate remains critical to avoid damaging the reactor walls. The cooling system would need to accommodate a higher flow rate due to the lower specific heat of gases compared to liquids. Effective cooling is essential to maintain reactor integrity and safety. Overall, the cooling requirements for gas core reactors are comparable to those of solid core reactors, emphasizing the importance of robust heat management systems.
aquitaine
Messages
30
Reaction score
9
If we were able to build a gas core reactor, how much heat would need to be dissapated? I bring this up because traditional solid core reactors require lots of heat to be pumped away (do you know the exact number?) to keep the core for melting, but since a gas core is already much hotter wouldn't the amount of heat needing to be moved away from the reactor be significantly less?
 
Engineering news on Phys.org
The heat removed would have to be the same unless you want your reactor walls to turn to gas too :)
 
Yeah, you'll probably be removing heat at the same rate, the only difference is the operating temperature. You'll have a higher flow rate than a water cooled reactor because the specific heat of a gas is much lower.
 
Hello, I'm currently trying to compare theoretical results with an MCNP simulation. I'm using two discrete sets of data, intensity (probability) and linear attenuation coefficient, both functions of energy, to produce an attenuated energy spectrum after x-rays have passed through a thin layer of lead. I've been running through the calculations and I'm getting a higher average attenuated energy (~74 keV) than initial average energy (~33 keV). My guess is I'm doing something wrong somewhere...
Back
Top