Register to reply 
A specific method of characteristics problem 
Share this thread: 
#1
Feb513, 08:50 PM

P: 67

In my previous PDE class we did nothing with method of chars. Now I am assigned one in a higher class, but all the examples I find online are not helpful for a particular problem I have.
du/dt+a*du/dx=f(t,x) with u(0,x)=0 and f(t,x)=1 if 1<=x<=1, and f(t,x)= 0 otherwise Differences between this and typical examples I see in my PDE book and online: 1. I rarely see nonhomogeneous ones. 2. Initial condition is NEVER equal to 0 in any example I've ever seen. 3. The solution I'm supposed to "show" is piecewise defined in 5 parts. I've seen a couple examples whose solution is defined into 2 parts, sometimes. But 5? Please be gentle. 


#2
Feb513, 09:28 PM

Homework
Sci Advisor
HW Helper
Thanks
P: 12,463

2. shouldn't matter  just plug the zero in to the general solution like you would any other number. 3. makes no difference  you just have more steps to do. Do it the same way  just divide the DE into the different regions. What is the actual problem you have to solve You've seen: http://en.wikipedia.org/wiki/Method_...ntial_equation 


#3
Feb513, 09:42 PM

Sci Advisor
HW Helper
Thanks
PF Gold
P: 5,060

Can you solve the following ODE, subject to the initial condition u = 0 at t = 0?
[tex]\frac{Du}{Dt}=f(t,x_0+at)[/tex] where x_{0} is a constant. 


#4
Feb613, 12:46 PM

P: 67

A specific method of characteristics problem
Obviously I'm missing something fairly rudimentary.
Simon: I wrote the problem I have to solve. du/dt+a*du/dx=f(t,x) with u(0,x)=0 and f(t,x)=1 if 1<=x<=1, and f(t,x)= 0 otherwise If I write out the equation for each region, I get 2 equations. Chestermiller: When you use capital D, is that the same as an ordinary derivative? I really don't see how to proceed. 


#5
Feb613, 02:15 PM

Sci Advisor
HW Helper
Thanks
PF Gold
P: 5,060




#6
Feb613, 04:06 PM

P: 67

I'm lost. Could you walk me through this?



#7
Feb613, 06:11 PM

Sci Advisor
HW Helper
Thanks
PF Gold
P: 5,060

Chet 


#8
Feb613, 06:28 PM

P: 67

Do I 'know how'? I guess not really.
Ok, let me put my attempt to 'solve' this. problem: ∂u/∂t+a*∂u/∂x=f(t,x) with f(t,x)=1 if 1<=x<=1 and f= 0 otherwise u(0,x)=0 For whatever reason, (I read this a long time ago) I set u(x,t)=U([itex]\tau[/itex], [itex]\xi[/itex]) with [itex]\xi[/itex] = xat and [itex]\tau[/itex] = t which leads to, after partial derivatives, ∂u/∂[itex]\tau[/itex] = f(t,x) Now integrate and either get u=[itex]\tau[/itex] for 1<=x<=1 or get 0 for x values other than that. So what am I missing? 


#9
Feb613, 07:57 PM

Sci Advisor
HW Helper
Thanks
PF Gold
P: 5,060

Yes. You're very close. So you have ∂u/∂[itex]\tau[/itex] = f(t,x). Now, you substitute [itex]x=\xi+at[/itex] to get [tex](\frac{\partial u}{\partial t})_\xi=f(t,\xi+at)[/tex] Now you take any value of [itex]\xi[/itex], say [itex]\xi=5[/itex] at time t = 0 (x = 5), and start integrating with respect to t (at constant [itex]\xi=5[/itex]), subject to the initial condition u = 0. So, in this example, u(x,t) = 0 until x = 5 + at = 1. That would be t = 4/a. After that u(t,x) = u(t,5+at) = (t  4/a) until x = 5 + at = +1 That would be at t = 6/a. After that u(t,x)=u(t,5+at) = 2/a for all subsequent times along the line x = 5 + at. So, integrating along the line x = 5 + at, you have: [itex]u=0[/itex] for [itex]t\leqslant 4/a[/itex] [itex]u=t4/a[/itex] for [itex]4/a\leqslant t\leqslant 6/a[/itex] [itex]u=2/a[/itex] for [itex]6/a\leqslant t[/itex] You can do this for different values of [itex]\xi[/itex]. 


#10
Feb713, 04:36 AM

P: 67

I have to say I still do not understand several aspects. What exactly is meant by the subscript [itex]\xi[/itex] and why is "u=0 until x=1"
Further, this does not appear to be the solution we're supposed to show. :( 


#11
Feb713, 08:43 AM

Sci Advisor
HW Helper
Thanks
PF Gold
P: 5,060

You are integrating with respect to t along a line x  at=constant. The constant is the value of x at t = 0. Anywhere you start integrating to the left of x = 1 at time = 0, the integrand f(t,x) is equal to zero. You will find that, throughout the entire region x < 1, the solution for u is going to be u = 0 for all t. But, once your line crosses over into the region 1<x<+1, your integrand f(t,x) suddenly jumps up to 1 (and stays there until your line crosses out of the region again at x = 1). I'm afraid I'm not explaining things very well. Hopefully, I said enough to give you the gist of what is happening. If not, all I can say is I did my best. Chet 


Register to reply 
Related Discussions  
Cauchy problem, method of characteristics  Differential Equations  4  
PDE problem, Solve using Method of Characteristics  Calculus & Beyond Homework  7  
General Method of Characteristics Problem  Differential Equations  4  
First Order PDE Cauchy problem Using Method of Characteristics  Calculus & Beyond Homework  1  
A Difficult Method of Characteristics Problem  Calculus & Beyond Homework  0 