How Does a Decreasing Radius Affect the Speed of a Rotating Cylinder?

In summary, the problem involves a large, cylindrical roll of tissue paper that is given a slight shove and unrolls on a horizontal surface. Using conservation of energy, the speed of the center of mass when the radius has diminished to 1.0 mm can be determined by solving for ω and then using the equation ω = v/r. The equation for moment of inertia of a cylinder can be used to solve for ω, and then the values can be substituted in to solve for v.
  • #1
gaborfk
53
0
Please, help with rotating rigid body problem

I am kind of stuck with this problem. Any takers?

A large, cylindrical roll of tissue paper of initial radius R lies on a long, horizontal surface with the outside end of the paper nailed to the surface. The roll is given a slight shove (V initial = 0) and commences to unroll. Assume the roll has a uniform density and that mechanical energy is conserved in the process. Determine the speed of the center of mass of the roll when its radius has diminished to r = 1.0 mm, assuming R = 6.0 meters.

This is what I got so far.

KE=(1/2)I(Omega)^2

for the cylinder I is :(1/2)MR^2

So mgh=(1/2)I(Omega)^2+(1/2)mv^2

I plugged in I

mgh=(1/2)(1/2)MR^2(Omega)^2+(1/2)mv^2

Then I used (omega)=v/r to get here

mgh=(1/4)MR^2(v/r)^2+(1/2)mv^2 the masses cancel

gh=(1/4)R^2(v/r)^2+(1/2)v^2

Now what? How do I get h? Thank you in advance!
 
Last edited:
Physics news on Phys.org
  • #2


Hi there, I am happy to help with your rotating rigid body problem. Here are a few steps you can follow to solve it:

1. Identify the variables: In this problem, we have the initial radius R, the final radius r, and the initial speed V. We also know that the mass of the cylinder is uniform, so we can use the mass M as a constant.

2. Use conservation of energy: Since the problem states that mechanical energy is conserved, we can use the equation: E_initial = E_final, where E is the total mechanical energy. The initial energy will be purely potential energy (mgh) and the final energy will be a combination of kinetic energy (1/2Iω^2) and potential energy (mgh).

3. Solve for ω: Using the equation for the moment of inertia of a cylinder (1/2MR^2) and substituting in the initial and final radii, we can solve for ω.

4. Solve for v: Now that we have ω, we can use the equation (ω = v/r) to solve for the speed v when the radius has diminished to r = 1.0 mm.

5. Substitute in values: Plug in the values for R, r, and ω to solve for v. Remember to convert the units to be consistent (e.g. meters to millimeters).

I hope this helps! Let me know if you have any further questions. Good luck!
 
  • #3


To solve this problem, we need to use the conservation of energy principle, which states that the total energy in a system remains constant. In this case, the initial energy of the system is solely potential energy, given by mgh, where m is the mass of the roll, g is the acceleration due to gravity, and h is the height of the roll.

As the roll unrolls, the potential energy is converted into rotational kinetic energy and translational kinetic energy, given by (1/2)I(omega)^2 and (1/2)mv^2, respectively.

Since the roll is unrolling on a horizontal surface, there is no change in height (h) and thus no change in potential energy. This means that the initial potential energy is equal to the final kinetic energy, given by (1/2)I(omega)^2+(1/2)mv^2.

We can rewrite this equation as mgh = (1/2)I(omega)^2 + (1/2)mv^2, and since the mass cancels out, we can solve for v to find the speed of the center of mass of the roll when its radius has diminished to r = 1.0 mm.

v = sqrt((gh - (1/2)I(omega)^2) / (1/2)r^2)

To find the moment of inertia (I) of the roll, we can use the formula for a solid cylinder, given by (1/2)MR^2. Plugging this into the equation, we get:

v = sqrt((gh - (1/4)MR^2(omega)^2) / (1/2)r^2)

Now, we need to find the value of (omega) at r = 1.0 mm. Since (omega) = v/r, we can plug in v = 0 (since the roll is initially at rest) and r = 6.0 m (given in the problem).

This gives us (omega) = 0/6.0 = 0 rad/s.

Plugging this into the previous equation, we get:

v = sqrt((gh - 0) / (1/2)(0.001)^2)

Simplifying, we get:

v = sqrt(2gh * 10^6)

Finally, we can plug in the given values of g = 9.8 m/s^2 and
 

FAQ: How Does a Decreasing Radius Affect the Speed of a Rotating Cylinder?

1. What is rotational kinetic energy?

Rotational kinetic energy is the energy an object possesses due to its rotation around an axis. It is dependent on the mass, shape, and rotational speed of the object.

2. How is rotational kinetic energy calculated?

The formula for rotational kinetic energy is E = 1/2 Iω², where E is the rotational kinetic energy, I is the moment of inertia, and ω is the angular velocity.

3. What is the difference between linear and rotational kinetic energy?

Linear kinetic energy is the energy an object possesses due to its motion in a straight line, while rotational kinetic energy is the energy an object possesses due to its rotation. They are both forms of kinetic energy and can be converted into one another.

4. What is the relationship between rotational kinetic energy and torque?

Torque is the force that causes an object to rotate around an axis. The greater the torque, the greater the rotational kinetic energy of the object will be. This means that an increase in torque will result in an increase in rotational kinetic energy.

5. How does rotational kinetic energy affect an object's stability?

Rotational kinetic energy can affect an object's stability by increasing its angular momentum, which makes it more difficult to change its direction of rotation. This can make an object more stable and resistant to tipping or falling over.

Back
Top