- #1
- 1,346
- 8
I crumbled some styrofoam peanuts today, with the intent to pack the bits inside a chamber for insulation. In the process, I noticed they built up a strong static charge. It got to the point where more bits of foam were sticking to my fingers instead of falling into the chamber. And those that managed to fall into the chamber were being repelled back out. A nice physics demo, but annoying to me
I remember using a Zerostat Antistatic Gun to neutralize static on vinyl audio records. For those who have never seen one of these, an image may be viewed a little over halfway down this page. I don't have that tool handy and wonder are there other simpler ways to neutralize the static charge on this material?
I recalled the static we build up sliding in stocking feet across a rug during the dry winter months, and that this didn't occur in the summertime. Warm air does hold more moisture than cold, and at least in temperate climates, there is plenty of moisture available. This leads me to think of one technique to try. Go into a steamy bathroom and see if the foam discharges. Other than that I am up for suggestions.
I remember using a Zerostat Antistatic Gun to neutralize static on vinyl audio records. For those who have never seen one of these, an image may be viewed a little over halfway down this page. I don't have that tool handy and wonder are there other simpler ways to neutralize the static charge on this material?
I recalled the static we build up sliding in stocking feet across a rug during the dry winter months, and that this didn't occur in the summertime. Warm air does hold more moisture than cold, and at least in temperate climates, there is plenty of moisture available. This leads me to think of one technique to try. Go into a steamy bathroom and see if the foam discharges. Other than that I am up for suggestions.