- #1
borderline182
- 1
- 0
here's the procedure and calculations to a lab i just did... the questions i need help answering are at the bottom.
Part 1
1. rinse the graduated cylinder w/ a small quantity of 1.00mol/L NaOH(aq) then add 50mL of 1.00mol/L NaOH(aq) to the coffee cup calorimeter. Record the initial temp.
2. 2. Rinse the graduated cylinder with tape water and then with a small quantity of 1.00mol/L HCl(aq). Quickly and carefully add 50mL of 1.00mol/L HCl(aq) to the NaOH(aq) in the calorimeter.
3. Record the highest temp observed, stirring gently and continuously.
Part 2
1. rinse the graduated cylinder with a small quantity of 1.00mol/L HCl(aq) quickly and carefully add 50mL of 1.00mol/L HCl(aq) to the calorimeter and record the initial temp
2. quickly and carefully measure out 2g of NaOH pellets. Add these to the 1.00mol/L HCl(aq) as soon as possible
3. stir the pellets until they have completely dissovled and record the highest temp.
Calculations
Reaction 1
Initial temp=21.5
Final temp=28
Change in temp= 6.5
Qsol’n = mct
Q = (100)(4.184)(6.5)
Q = 2719.6 J
Qrxn = -2719.6 J
Reaction 2
Initial temp= 21.5
Final temp = 43
Change in temp = 21.5
Qsol’n=mct
Q = (50)(4.184)(21.5)
Q = 4496.8 J
Qrxn = -4497.8 J
# of mol’s of HCl used = 0.05
# of mol’s of NaOH used = 0.05
QUESTIONS I NEED HELP ANSWERING
WHY was the change in temperature much more significant when using solid NaOH? And why is the enthalpy change (Qrxn) much lower?
What changes do you need to make to the thermochemical equation if you perform the investigation using solid sodium?
Part 1
1. rinse the graduated cylinder w/ a small quantity of 1.00mol/L NaOH(aq) then add 50mL of 1.00mol/L NaOH(aq) to the coffee cup calorimeter. Record the initial temp.
2. 2. Rinse the graduated cylinder with tape water and then with a small quantity of 1.00mol/L HCl(aq). Quickly and carefully add 50mL of 1.00mol/L HCl(aq) to the NaOH(aq) in the calorimeter.
3. Record the highest temp observed, stirring gently and continuously.
Part 2
1. rinse the graduated cylinder with a small quantity of 1.00mol/L HCl(aq) quickly and carefully add 50mL of 1.00mol/L HCl(aq) to the calorimeter and record the initial temp
2. quickly and carefully measure out 2g of NaOH pellets. Add these to the 1.00mol/L HCl(aq) as soon as possible
3. stir the pellets until they have completely dissovled and record the highest temp.
Calculations
Reaction 1
Initial temp=21.5
Final temp=28
Change in temp= 6.5
Qsol’n = mct
Q = (100)(4.184)(6.5)
Q = 2719.6 J
Qrxn = -2719.6 J
Reaction 2
Initial temp= 21.5
Final temp = 43
Change in temp = 21.5
Qsol’n=mct
Q = (50)(4.184)(21.5)
Q = 4496.8 J
Qrxn = -4497.8 J
# of mol’s of HCl used = 0.05
# of mol’s of NaOH used = 0.05
QUESTIONS I NEED HELP ANSWERING
WHY was the change in temperature much more significant when using solid NaOH? And why is the enthalpy change (Qrxn) much lower?
What changes do you need to make to the thermochemical equation if you perform the investigation using solid sodium?