Could Wireless Electricity Revolutionize Energy Use Without Health Risks?

AI Thread Summary
Wireless electricity has the potential to revolutionize energy use, but concerns about health risks remain significant. Discussions highlight the feasibility of large-scale adoption, particularly in relation to technologies like space-based power beaming and the implications of living near RF devices or power lines. Efficiency issues are noted, with skepticism about the practicality of transmitting power wirelessly over distances due to conversion losses and the need for bulky equipment. While charging pads may see growth, the limitations of portability and efficiency could hinder broader applications. Overall, health concerns and efficiency challenges are critical factors in the future of wireless electricity.
DuncanM
Messages
99
Reaction score
3
I came across an interesting story today and thought I would share it here.

http://www.fastcompany.com/magazine/132/brilliant.html"

Neat stuff.

Although I do wonder, even if they get it working and feasible for large-scale adoption, would there be any adverse health affects? (I sometimes read articles in magazines like "Popular Mechanics" and "Popular Science" about how groups are considering producing power in space and beaming it down to Earth as microwaves. I don't think I'd feel comfortable living in a large microwave oven. Or being surrounded by RFID devices. Or living under power lines. etc.)
 
Last edited by a moderator:
Engineering news on Phys.org
DuncanM said:
I came across an interesting story today and thought I would share it here.

http://www.fastcompany.com/magazine/132/brilliant.html"

Neat stuff.

Although I do wonder, even if they get it working and feasible for large-scale adoption, would there be any adverse health affects? (I sometimes read articles in magazines like "Popular Mechanics" and "Popular Science" about how groups are considering producing power in space and beaming it down to Earth as microwaves. I don't think I'd feel comfortable living in a large microwave oven. Or being surrounded by RFID devices. Or living under power lines. etc.)

MIT has been working on that for a while.

http://web.mit.edu/newsoffice/2007/techtalk51-30.pdf

http://web.mit.edu/newsoffice/2007/wireless-0607.html

CS
 
Last edited by a moderator:
I think health concerns will be a major issue here and because of the necessity of some sort of power focussing any applications will be limited to static components.
 
I doubt the efficiency can ever be very high. There are losses in converting from AC-DC, DC-RF, coupling loss, RF-DC and maybe DC-AC.

Makes a lot more sense to just run a wire and have no conversions or just one; AC-DC.
 
Charging pads will no doubt be an expanding market, though I think a limited one because of one critical problem: people won't want to carry around the charging apparatus attached to their cell phone all the time. Power transmitted across the room to power a laptop computer? Never going to happen. It is far too inefficient and again, you'd need a couple of pounds of coils or a big dish attached to the back of your laptop for it to work at all.

For health concerns, low frequency EMF (power lines) have none. Microwaves obviously have some, particularly for the space-based power station idea.
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
Thread 'Electromagnet magnetic field issue'
Hi Guys We are a bunch a mechanical engineers trying to build a simple electromagnet. Our design is based on a very similar magnet. However, our version is about 10 times less magnetic and we are wondering why. Our coil has exactly same length, same number of layers and turns. What is possibly wrong? PIN and bracket are made of iron and are in electrical contact, exactly like the reference design. Any help will be appreciated. Thanks. edit: even same wire diameter and coil was wounded by a...

Similar threads

Replies
9
Views
5K
Back
Top