Is the Concept of Holes in Intrinsic Semiconductors Merely Imaginary?

  • Thread starter Thread starter Outrageous
  • Start date Start date
  • Tags Tags
    Semiconductor
AI Thread Summary
In intrinsic semiconductors, when electrons transition to the conduction band, they leave behind holes in the valence band, which are not merely imaginary but have a physical status similar to electrons. These holes and electrons are created in pairs when semiconductor bonds break, and their concentrations are equal, varying with temperature. The Fermi level is positioned near the middle of the forbidden zone, indicating that free holes or electrons are not found there. Electrons in the valence band possess lower energy than those at the Fermi level, reflecting their discrete energy states governed by quantum mechanics. Thus, the concept of holes is grounded in quantum mechanics, representing real empty orbitals rather than mere abstractions.
Outrageous
Messages
373
Reaction score
0
In intrinsic semiconductor, electrons jump into conduction band, a hole is left in valence band.
My question is the above statement correct? I though the hole is something we imagine, how to say the hole is in the valence band?
If I said an electron is in valence band, is that implying that the energy level of that electron is lower compared to the electron in fermi level? Am I correct? or it has any other meaning?
Thank you.
 
Engineering news on Phys.org
Outrageous,

In intrinsic semiconductor, electrons jump into conduction band, a hole is left in valence band. My question is the above statement correct?

An intrinsic semiconductor means that the semiconductor is undoped. Holes and electrons in intrinsic semiconductor material are created in pairs when a semiconductor bond is broken. When an electron leaves the valance band, a hole is left behind. The hole and electron concentration will be equal and varies with the temperature of the intrinsic semiconductor.

I though the hole is something we imagine, how to say the hole is in the valence band?

In quantum mechanics (QM), a hole has a physical status as an electron does, including an effective mass, albeit a different effective mass than an electron.

If I said an electron is in valence band, is that implying that the energy level of that electron is lower compared to the electron in fermi level? Am I correct? or it has any other meaning?

The Fermi level in an intrinsic semiconductor is located close to the middle of the forbidden zone at room temperature. That means you will not find any free holes or electrons there, so the question is without meaning.

Ratch
 
Outrageous said:
In intrinsic semiconductor, electrons jump into conduction band, a hole is left in valence band.
My question is the above statement correct? I though the hole is something we imagine, how to say the hole is in the valence band?
If I said an electron is in valence band, is that implying that the energy level of that electron is lower compared to the electron in fermi level? Am I correct? or it has any other meaning?
Thank you.

Remember that all is governed by quantum mechanics, meaning that the energy of the electrons is discrete. Initially, the electron populates a quantum mechanical state k (eigenfunction of the Hamilton operator, also called orbital) and when it jumps to the conduction band (into another orbital it finds there) its original, ground-state orbital remains, it does not just vanish. In this sense, the hole is very real, its an empty orbital, however there is no observable for it (as the the wavefunction is also no observable, only the square modulus of the wavefunction).
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
Thread 'Electromagnet magnetic field issue'
Hi Guys We are a bunch a mechanical engineers trying to build a simple electromagnet. Our design is based on a very similar magnet. However, our version is about 10 times less magnetic and we are wondering why. Our coil has exactly same length, same number of layers and turns. What is possibly wrong? PIN and bracket are made of iron and are in electrical contact, exactly like the reference design. Any help will be appreciated. Thanks. edit: even same wire diameter and coil was wounded by a...
Back
Top