Is the principal of superposition of forces a part of the second law?

In summary: Anyway, the reason why we can assume that velocities are vectors is because that's what we need to calculate the effects of forces.
  • #1
Jiman
28
6
The three laws are basic principles in Newtonian Mechanics. The principle of superposition of forces is part of the second law.But before we make the assumption of superposition of forces,we have to make another assumption which is the principal of superposition of motion.why are displacement,Velocity and acceleration all VECTORS?
 
  • Like
Likes Delta2
Science news on Phys.org
  • #2
Good question!
In order to complete calculations, it is convenient to assign both, magnitude and direction to those.
 
  • #3
Jiman said:
The three laws are basic principles in Newtonian Mechanics. The principle of superposition of forces is part of the second law.But before we make the assumption of superposition of forces,we have to make another assumption which is the principal of superposition of motion.why are displacement,Velocity and acceleration all VECTORS?

This is puzzling.

The requirement for something to be a vector is NOT that there has to be superposition. Superposition of vectors is nothing more than vector addition. I can do similar thing to, say, displacement and velocity (boat pointing in one direction, river flowing in another).

Vector addition is a consequence of something being a vector, not the other way around.

Zz.
 
  • Like
Likes DaveE, etotheipi and sophiecentaur
  • #4
ZapperZ said:
This is puzzling.

The requirement for something to be a vector is NOT that there has to be superposition. Superposition of vectors is nothing more than vector addition. I can do similar thing to, say, displacement and velocity (boat pointing in one direction, river flowing in another).

Vector addition is a consequence of something being a vector, not the other way around.

Zz.
The force can add Vectorily due to the principle of superposition of forces. But accereration and velocity can also add Vectorily due to which assumption??
 
  • #5
Jiman said:
The force can add Vectorily due to the principle of superposition of forces. But accereration and velocity can also add Vectorily due to which assumption??

Once again, this is rather puzzling.

If F = ma, when if F is a result of the addition of forces from various direction, why can't acceleration also be the result of the addition of acceleration of various acceleration?

There are no "assumptions". It is the mathematics. Once you declare something as a vector, then all the mathematical rules that apply to a vector comes into play.

Zz.
 
  • #6
ZapperZ said:
Once again, this is rather puzzling.

If F = ma, when if F is a result of the addition of forces from various direction, why can't acceleration also be the result of the addition of acceleration of various acceleration?

There are no "assumptions". It is the mathematics. Once you declare something as a vector, then all the mathematical rules that apply to a vector comes into play.

Zz.
The force can add Vectorily due to physical assumption!. Displacement,Velocity and Accereration can add Vectorily due to Mathematical Method,right?
 
  • #7
Jiman said:
The force can add Vectorily due to physical assumption!.

What physical assumption?

Zz.
 
  • #8
ZapperZ said:
What physical assumption?

Zz.
Force Displacement,Velocity and Accereration can add Vectorily only due to Mathematical Method,right?
 
  • #9
ZapperZ said:
What physical assumption?

Zz.
The principal of superposition of forces is based on the mathematical method,right?
 
  • #10
Jiman said:
The three laws are basic principles in Newtonian Mechanics. The principle of superposition of forces is part of the second law.But before we make the assumption of superposition of forces,we have to make another assumption which is the principal of superposition of motion.why are displacement,Velocity and acceleration all VECTORS?
The upshot is. To start with physics (both experimental and theoretical) you need a spacetime model, and the Galilei-Newton spacetime model simply uses a bundle of 3D Euclidean spaces along a directed 1D time space. Taken together with Lex 1 (the special principle of relativity) that's the abstract formulation of Newton's "absolute space and absolute time".
 
  • #11
ZapperZ said:
The requirement for something to be a vector is NOT that there has to be superposition.
Superposition can only apply when you have an isotropic, linear medium. We assume that in most of our dealings with SpaceTime. Newton certainly did.
 
  • #12
vanhees71 said:
The upshot is. To start with physics (both experimental and theoretical) you need a spacetime model, and the Galilei-Newton spacetime model simply uses a bundle of 3D Euclidean spaces along a directed 1D time space. Taken together with Lex 1 (the special principle of relativity) that's the abstract formulation of Newton's "absolute space and absolute time".
Thank you,my friend!
 
  • #13
ZapperZ said:
Once again, this is rather puzzling.

If F = ma, when if F is a result of the addition of forces from various direction, why can't acceleration also be the result of the addition of acceleration of various acceleration?

There are no "assumptions". It is the mathematics. Once you declare something as a vector, then all the mathematical rules that apply to a vector comes into play.

Zz.
Thank you ,my friend!Are you student?Which university?
 
  • Haha
  • Like
  • Wow
Likes Frigus, etotheipi, anorlunda and 1 other person
  • #14
Jiman said:
But acceleration and velocity can also add Vectorily due to which assumption??
If we assume that velocities are vectors, then it follows from the definition of acceleration (first derivative of velocity) that acceleration is also a vector. So your question comes down to asking why we can start with the assumption that velocities are vectors.

We do this because it leads to a useful mathematical treatment of real-world situations. For example: if two cars moving with velocities ##\vec{v_1}## and ##\vec{v_2}## collide we can subtract the velocity vectors to find the speed of the collision; we calculate the velocity across the surface of the Earth of a boat moving with velocity ##\vec{v_1}## across a river when the water is moving with ##\vec{v_2}## as velocity ##\vec{v_1}+\vec{v_2}##

If vector addition didn't accurately describe how velocities work in the real world we wouldn't use vectors to describe velocities. We'd use some other mathematical formalism that did match the real-world behavior.
 
Last edited:
  • Like
Likes Lnewqban
  • #15
For what it's worth, the vector addition of forces, in its geometrical interpretation, is given by Newton as "Corollary 1" to "Law 2" in his Principia Mathematica. In an English translation of Newton's Latin:

Newton said:
A body acted on by forces acting jointly describes the diagonal of a parallelogram in the same time in which it would describe the sides if the forces were acting separately.

This is accompanied by a parallogram diagram which is very similar to the one that you see in most (or all?) introductory physics textbooks today. It lacks only the arrows that normally represent vectors nowadays.
 
  • Like
  • Informative
Likes vanhees71, Nugatory, kith and 1 other person
  • #16
Nugatory said:
If we assume that velocities are vectors, then it follows from the definition of acceleration (first derivative of velocity) that acceleration is also a vector. So your question comes down to asking why we can start with the assumption that velocities are vectors.

We do this because it leads to a useful mathematical treatment of real-world situations. For example: if two cars moving with velocities ##\vec{v_1}## and ##\vec{v_2}## collide we can subtract the velocity vectors to find the speed of the collision; we calculate the velocity across the surface of the Earth of a boat moving with velocity ##\vec{v_1}## across a river when the water is moving with ##\vec{v_2}## as velocity ##\vec{v_1}+\vec{v_2}##

If vector addition didn't accurately describe how velocities work in the real world we wouldn't use vectors to describe velocities. We'd use some other mathematical formalism that did match the real-world behavior.
It is only mathematical method,not physical assumption,right?
 
  • #17
Nugatory said:
If we assume that velocities are vectors, then it follows from the definition of acceleration (first derivative of velocity) that acceleration is also a vector. So your question comes down to asking why we can start with the assumption that velocities are vectors.

We do this because it leads to a useful mathematical treatment of real-world situations. For example: if two cars moving with velocities ##\vec{v_1}## and ##\vec{v_2}## collide we can subtract the velocity vectors to find the speed of the collision; we calculate the velocity across the surface of the Earth of a boat moving with velocity ##\vec{v_1}## across a river when the water is moving with ##\vec{v_2}## as velocity ##\vec{v_1}+\vec{v_2}##

If vector addition didn't accurately describe how velocities work in the real world we wouldn't use vectors to describe velocities. We'd use some other mathematical formalism that did match the real-world behavior.
Newton's parallelogram law is only mathematical method without physical significants,right?
 
  • #18
ZapperZ said:
This is puzzling.

The requirement for something to be a vector is NOT that there has to be superposition. Superposition of vectors is nothing more than vector addition. I can do similar thing to, say, displacement and velocity (boat pointing in one direction, river flowing in another).

Vector addition is a consequence of something being a vector, not the other way around.

Zz.
Newton's parallelogram law is only mathematical method without physical significants,right?
 
  • #19
Jiman said:
It is only mathematical method,not physical assumption,right?
Well, the choice of a mathematical spacetime model is an assumption about how the phenomena may be best described. You need it to start with making measurements. E.g., to be able to measure the distance between two physical points you need a mathematical model about the geometry of space. In Newtonian mechanics it's assumed that space is mathematically described as a 3D Euclidean affine space. This enables you to measure distances and angles, areas and volumes etc.

You also need time. By assumption in Newtonian physics it's just a directed 1D axis. At each point you can think to be fastened a copy of the 3D Euclidean affine space, which together gives Newton's absolute space and time.

These are just "educated guesses". You cannot by any mathematical proof be sure that it's correct as a description of the real world. This you can only establish by observations, i.e., being enabled to measure time intervals by clocks and determine the position of points by using e.g., an arbitrary reference point and a cartesian basis describing uniquely each point of space by a position vector or by three Cartesian coordinates wrt. this basis.

Then it's an empirical question, whether your spacetime model is correct. As we know today, it's not entirely correct, because relativistic spacetime models (Minkowski space for SRT and a Lorentz manifold or GR) are valid for all yet known phenomena and not only in the realm of the "non-relativistic limit".
 
  • Like
Likes Delta2 and etotheipi
  • #20
Thank you.The model of space and time is foundation of many other physical problems!
 

1. What is the principle of superposition of forces?

The principle of superposition of forces states that the net force acting on an object is equal to the sum of all individual forces acting on that object. This means that multiple forces can act on an object simultaneously, and their effects can be added together to determine the overall force.

2. Is the principle of superposition of forces a part of the second law of motion?

Yes, the principle of superposition of forces is a fundamental concept in Newton's second law of motion. It is the mathematical representation of how multiple forces affect the motion of an object.

3. How does the principle of superposition of forces relate to the second law of motion?

The principle of superposition of forces is a direct consequence of the second law of motion. It explains how the acceleration of an object is directly proportional to the net force acting on it, and inversely proportional to its mass.

4. Can the principle of superposition of forces be applied to all types of forces?

Yes, the principle of superposition of forces can be applied to all types of forces, including gravitational, electromagnetic, and contact forces. It is a universal principle that applies to all objects and all types of forces.

5. Why is the principle of superposition of forces important in physics?

The principle of superposition of forces is important in physics because it allows us to understand and predict the motion of objects under the influence of multiple forces. It is a fundamental concept that forms the basis of many other principles and laws in physics.

Similar threads

Replies
2
Views
941
Replies
1
Views
491
  • Quantum Interpretations and Foundations
Replies
0
Views
88
Replies
1
Views
597
Replies
20
Views
2K
Replies
14
Views
7K
Replies
4
Views
831
  • Thermodynamics
Replies
8
Views
1K
Replies
27
Views
1K
  • Quantum Physics
Replies
12
Views
1K
Back
Top