Problem about units conversion: cm^2 --> m^2

Click For Summary
The discussion centers on converting area measurements from square centimeters to square meters. It clarifies that while 10 cm equals 0.1 m, squaring the length results in 100 cm² equating to 0.01 m², not to be confused with linear measurements. The importance of maintaining the correct units during calculations is emphasized, as area units differ from length units. The conversation also highlights that converting an area to a length is not feasible, akin to comparing apples to oranges. Ultimately, the area of 100 cm² is confirmed to be equivalent to 0.01 m².
inuka00123
Messages
16
Reaction score
2
Homework Statement
I need to find how much meters equal to area of 100cm²
Relevant Equations
100cm = 1m
10cm = 1/10m = 0.1m
10cm² ≠ (1/10m)² = (0.1m)²
in the problem 100 cm is obviously equal to 1m, and 10cm is equal to 1/10m and it is equal to 0.1m, but when you take the square of the 10cm it is obviously does not equal (1/10m)² nor (0.1m)², therefore (10cm x 10cm ≠ 1/10m x 1/10m = 0.1m x 0.1m), then to what 10cm x 10cm is equal to in meters? 1/100m or 0.01 meters does not equal to 100cm, this problem seems really easy, but I've tried come up with solution but I wasn't able to. if I take off the units it is obvious that one doesn't not equal to other, any help would be really appreciated.
 
Physics news on Phys.org
inuka00123 said:
when you take the square of the 10cm it is obviously does not equal (1/10m)²
If ##x=y ## then ##x^2=y^2##.
If ##10cm=(1/10)m## then what is ##(10cm)^2##?
 
inuka00123 said:
1/100m or 0.01 meters does not equal to 100cm
No, it is 0.01 m² = 100 cm². The exponent on the units is important:
  • (0.1 m) X (0.1 m) = (0.1 X 0.1) (m X m) = 0.01 m.m = 0.01 m²;
  • (10 cm) X (10 cm) = (10 X 10) (cm X cm) = 100 cm.cm = 100 cm².
You can even have uncommon units like (0.1 m) X (10 cm) = (0.1 X 10) (m X cm) = 1 m.cm which is also equal to 0.01 m² or 100 cm².
 
inuka00123 said:
Homework Statement: I need to find how much meters equal to area of 100cm²
That can't be answered! The meter is a unit of length and the square centimeter is a unit of area. You can't convert an area to a length, it's like converting apples to oranges. The way you've written your thread title indicates that you understand this. You want to convert 100 cm2 to square meters.

Suppose the figure below is a 10 cm by 10 cm square.

1760146974375.webp


It has an area of 100 cm2 because (10 cm)(10 cm) = 100 cm2.

(You can verify this by counting grid squares. There are 100 grid squares, each with an area of 1 cm2.)

The figure is also a 0.1 m by 0.1 m square. What is it's area in square meters?

You can also look at it this way: How many of these 10 cm by 10 cm squares will fit in a square meter? So, this 10 cm by 10 cm square is what fraction of a square meter?
 
Last edited:
inuka00123 said:
this problem seems really easy, but I've tried come up with solution but I wasn't able to. if I take off the units it is obvious that one doesn't not equal to other, any help would be really appreciated.

Areas.webp
 

Attachments

  • Like
Likes jack action
If have close pipe system with water inside pressurized at P1= 200 000Pa absolute, density 1000kg/m3, wider pipe diameter=2cm, contraction pipe diameter=1.49cm, that is contraction area ratio A1/A2=1.8 a) If water is stationary(pump OFF) and if I drill a hole anywhere at pipe, water will leak out, because pressure(200kPa) inside is higher than atmospheric pressure (101 325Pa). b)If I turn on pump and water start flowing with with v1=10m/s in A1 wider section, from Bernoulli equation I...

Similar threads

  • · Replies 4 ·
Replies
4
Views
2K
  • · Replies 11 ·
Replies
11
Views
2K
Replies
4
Views
2K
  • · Replies 10 ·
Replies
10
Views
3K
  • · Replies 4 ·
Replies
4
Views
2K
  • · Replies 14 ·
Replies
14
Views
2K
Replies
1
Views
2K
Replies
4
Views
6K
Replies
1
Views
8K
  • · Replies 7 ·
Replies
7
Views
2K