What Are the Best Beginner Books on System Engineering and Simulation?

AI Thread Summary
For beginners in system engineering and simulation, "Systems Engineering Principles and Practice" is highly recommended for its comprehensive coverage. Another valuable resource is "System Engineering Management," which provides insights into the management aspects of system engineering. Both books cater to the needs of graduate and undergraduate students. Older editions are also considered acceptable for foundational knowledge. These recommendations serve as a solid starting point for anyone new to the field.
Pattielli
Messages
296
Reaction score
0
Would you please introduce me some books on basic system simulations, engineering and modeling which to you are good and sufficient for me-a beginner ? Old ones are also fine...
Any advice, suggestions or recomendations are highly appreciated !

Thank you,
 
Engineering news on Phys.org

Thread 'Query on Isentropic relationships (such as PV^gamma = constant)'

Hi all, I have a question. So from the derivation of the Isentropic process relationship PV^gamma = constant, there is a step dW = PdV, which can only be said for quasi-equilibrium (or reversible) processes. As such I believe PV^gamma = constant (and the family of equations) should not be applicable to just adiabatic processes? Ie, it should be applicable only for adiabatic + reversible = isentropic processes? However, I've seen couple of online notes/books, and...
View full post »

Thread 'Dry sump pump issue'

I have an engine that uses a dry sump oiling system. The oil collection pan has three AN fittings to use for scavenging. Two of the fittings are approximately on the same level, the third is about 1/2 to 3/4 inch higher than the other two. The system ran for years with no problem using a three stage pump (one pressure and two scavenge stages). The two scavenge stages were connected at times to any two of the three AN fittings on the tank. Recently I tried an upgrade to a four stage pump...
View full post »

Similar threads

How to model the behavior of a closed loop position system?
Replies
9
Views
3K
Engineering Book on Aircraft Engine Lubrication/Oil System Design
Replies
5
Views
3K
Real-time engine simulation - oil temperature
Replies
8
Views
3K
What are best civil engineering books for beginners?
Replies
4
Views
4K
Engineering calculations as a deliverable: standards and references
Replies
2
Views
2K
Quantum Good resources for a beginner getting into Quantum Physics?
Replies
5
Views
3K
Looking for books on aircraft engine maintenance
Replies
12
Views
2K
Fluid dynamics: simulation of an oil system
Replies
15
Views
3K
Other Best trigonometry books for beginners and self study
Replies
3
Views
4K
Engineering Drawing: An Essential Tool for the Egyptian Engineer
Replies
5
Views
3K

Hot Threads

Recent Insights

Back
Top