A/C Electromagnet: Safety & Uses Explained

  • Thread starter Thread starter DkEnrgyFrk
  • Start date Start date
  • Tags Tags
    Electromagnet
Click For Summary
SUMMARY

This discussion focuses on the safety and operational principles of A/C electromagnets, particularly the use of variacs (auto-transformers) to control voltage and current. Participants emphasize the importance of understanding inductance and impedance in A/C circuits, explaining that inductors resist changes in current, preventing short circuits. Key concepts include the distinction between resistance in DC circuits and impedance in AC circuits, as well as the necessity of proper insulation between coils to avoid electrical hazards. The conversation highlights the critical role of understanding these principles for safe electromagnet operation.

PREREQUISITES
  • Understanding of A/C and D/C electrical circuits
  • Familiarity with inductors and their properties
  • Knowledge of variacs (auto-transformers) and their applications
  • Basic electrical safety practices
NEXT STEPS
  • Research the principles of A/C impedance and its calculations
  • Learn about the operation and applications of variacs in electrical circuits
  • Study the construction and safety measures for electromagnets
  • Explore the relationship between coil turns and induced voltage in transformers
USEFUL FOR

Electrical engineers, hobbyists working with electromagnets, and anyone interested in understanding A/C circuit safety and functionality.

DkEnrgyFrk
Messages
10
Reaction score
0
I am looking at electromagnets and discovered an article using an A/C version.
What I am surprised by is that there is no mention of how the A/C is being used.
http://www.coolmagnetman.com/magacem.htm
Wouldn't someone creating this version of an electromagnet kill themselves?
There's no mention whether the author uses any kind of lamp or anything to control the power running into this thing.
If this thing was wired into an outlet, wouldn't a fuse at the main's blow?
 
Engineering news on Phys.org
You forgot the part on that page which says "Connect up a variac to the coil so you can control the voltage and current going to it."

The variac is also called auto-transformer. They usually have a fuse which would blow if you try to short circuit it.
 
I did read that wrong. I don't understand what that is yet, but I'm going to check wikipedia and see.

Why can a single coil like the one primary coil of a transformer have voltage applied to it without being a short circuit? Does the winding of wire create resistance? A transformer doesn't have any resistance attached to its primary coil does it?
 
Coils are inductors whether in transformers, electromagnets or something else.

When you apply DC voltage to an inductor, it tries to create a magnetic field which creates a force to resist the rise of current. The higher the frequency of breaking on and off the circuit with DC voltage, the longer it takes for the current to rise. if the frequency is high enough, the current in inductor shall never be able to rise to become a short circuit.

For a standard inductor with L Henry inductance, connected across AC of frequency f Hz, the effective resistance is 2*PI*f*L ohms. This is also called reactance.
 
DkEnrgyFrk said:
...Why can a single coil like the one primary coil of a transformer have voltage applied to it without being a short circuit? Does the winding of wire create resistance? A transformer doesn't have any resistance attached to its primary coil does it?

the primary winding will have a DC resistance maybe a few 10's of ohms or 100's of ohms

But in an AC circuit we don't so much look at that resistance value ... rather because its a coil ( an inductor) it has an impedance to the AC current flowing through it

DC circuit we call it resistance
AC circuit we call it impedance

its that impedance that stops a relatively low wire resistance from becoming a short circuit to the AC current

Do a google search on Impedance ( AC impedance) and have some fun learning :)

Dave
 
That is absolutely amazing. Thanks for the replies.

How many wraps/turns of a wire constitutes a coil that can resist(DC)/impede(AC) a short circuit?
A 12 gauge wire can be connected to a 120v outlet and as long as there are enough turns, we have a transformer primary without short? And if I create another coil of wiring that's brought closer to it, with more turns, a higher voltage will be induced across it, becomes the secondary?
 
Yea, I guess so. But the coils of the wire should be insulated from each other, that's important.
 

Similar threads

Replies
18
Views
2K
  • · Replies 6 ·
Replies
6
Views
3K
  • · Replies 2 ·
Replies
2
Views
9K
  • · Replies 6 ·
Replies
6
Views
6K
  • · Replies 4 ·
Replies
4
Views
8K
Replies
7
Views
15K
  • · Replies 4 ·
Replies
4
Views
4K
  • · Replies 23 ·
Replies
23
Views
7K
  • · Replies 22 ·
Replies
22
Views
4K
  • · Replies 8 ·
Replies
8
Views
3K