A/D Signal Processing: Sampling Frequency & Quantization

mohlam12
Messages
153
Reaction score
0
Hello,

I'd like to know the relation between the sampling frequency and the quantization.

If the sampling frequency is 200KHz, and the analog signal ahs a maximum frequency of 80KHz, How many bits will the qantization be done to have a 6Mb/s bitrate?
 
Last edited:
Engineering news on Phys.org
I figured it out.

Thanks :)
 
Last edited by a moderator:

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »
Thread 'Beauty of old electrical and measuring things, etc.'

Thread 'Beauty of old electrical and measuring things, etc.'

Even as a kid, I saw beauty in old devices. That made me want to understand how they worked. I had lots of old things that I keep and now reviving. Old things need to work to see the beauty. Here's what I've done so far. Two views of the gadgets shelves and my small work space: Here's a close up look at the meters, gauges and other measuring things: This is what I think of as surface-mount electrical components and wiring. The components are very old and shows how...
View full post »

Similar threads

Digital Electronics: Image Frequencies & Nyquist/Shannon Theorems
Replies
7
Views
4K
Baseband Signal Processing and Digital to Analog Converters
Replies
2
Views
2K
EMF (Electromagnetic Field) & EHS (Electromagnetic Hyper Sensitivity)
Replies
3
Views
133
Signal classification and processing for a gesture sensor module
Replies
7
Views
1K
Help with waveform control: frequency, phase and amplitude
Replies
46
Views
5K
Can Two Cheap SDR Radios Accurately Measure RF Noise Correlation?
Replies
26
Views
3K
I What is a distinct feature of an ambiguous result?
Replies
15
Views
4K
MATLAB Deconvolving two signals with different sampling rates
Replies
4
Views
2K
Intermediate Frequency vs Baseband Signal Processing
Replies
3
Views
12K
How does AM broadcasting/receiving work + a project for HS students?
Replies
20
Views
1K

Hot Threads

Recent Insights

Back
Top