A question with capacitor and a switch

  • Thread starter Thread starter ursulan
  • Start date Start date
  • Tags Tags
    Capacitor Switch
ursulan
Messages
10
Reaction score
0

Homework Statement


Initially, the switch is in position A and capacitors and are uncharged. Then the switch is flipped to position B. Afterward, what are the charge on and the potential difference across each capacitor?

Position a is a 100V battery and a 15microF capacitor C1. Position B is C1 C2 and C3 in series with C2 being 20 microfarads and C3 30 microfarads.

Homework Equations



Q=CV

The Attempt at a Solution


I found the total capacitance which was 6.66uF, and the Q od C2 and C3 is 667uC which works for Q=CV. However Q1 is 833uF and I have no idea why! I know C in series all have same Q but C1 was charged first so i have no idea!
 
Physics news on Phys.org
First, Farads are units of capacitance not charge.
 
i know i meant 833uC
 
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
The value of H equals ## 10^{3}## in natural units, According to : https://en.wikipedia.org/wiki/Natural_units, ## t \sim 10^{-21} sec = 10^{21} Hz ##, and since ## \text{GeV} \sim 10^{24} \text{Hz } ##, ## GeV \sim 10^{24} \times 10^{-21} = 10^3 ## in natural units. So is this conversion correct? Also in the above formula, can I convert H to that natural units , since it’s a constant, while keeping k in Hz ?

Similar threads

Back
Top